Jet Tools JWP-208 Optional Accessories, Ordering Replacement Parts, Head Assembly Parts List

Problem	Possible Cause	Solution
		is correct, you have a motor problem.
	Motor failure.	If electrical motor is suspect, you have two
		options: Have a qualified electrician test the
		motor for function or remove the motor and
		take it to a quality electric motor repair shop
		and have it tested.
	Miswiring of the unit.	Double check to confirm all electrical
		connections are correct and properly tight. The
		electrical connections other than the motor are
		pre-assembled and tested at the factory.
		Therefore, the motor connections should be
		double checked as the highest probability for
		error, If problems persist, double check the
		factory wiring.
	On/off switch failure.	If the on/off switch is suspect you have two
		options: Have a qualified electrician test the
		switch for function, or purchase a new on/off
		switch and establish if that was the problem on
		changeout.

Optional Accessories

(for the JWP-208 Planer)

Stock No	Description
708808	Knives, Single Sided (set of 4)
708583	Low Speed Gear Kit

Ordering Replacement Parts

To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:31pm (CST), Monday through Friday. Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

Parts

Head Assembly – Parts List

Index	Part No.	Description	Size	Qty
1	JWP208-001	Head Casting	....................................	1
2	TS-1525021	Set Screw	M10 x 12	8
3	JWP208-003	Cutterhead	....................................	1
4	6292620	Spring	....................................	8
5	708808	Knife	....................................	4
6	JWP208-006	Knife Gib	....................................	4
7	6292623	Hex Cap Bolt	M8 x 10	24
8	JWP208-008	Knife Gauge Bar	....................................	1
9	JWP208-009	Knife Gauge	....................................	2
10	JWP208-010	Washer	3/8	2
11	JWP208-011	Nut	M10	2

22