Makita HR1821 instruction manual Fig. fi

Blow-out bulb

0 Use the blow-out bulb to clean out the hole.

Fig. 10

Anchor setting procedure

0 The drill bit has a red marking which can be used to indicate the anchor length. Use the depth rod when drilling for setting a number of anchors a t the same depth.

ed marking chor setting tool

Put a plug in the tip of an anchor and hammer it into concrete.

Screw in a bolt for fastening equipment.

Fig. fi

Drilling in wood or metal

Set the push rod for “rotation only.” Then use the drill chuck and chuck adapter (optional equipment), installing it as described in “Installing and removing the drill bit (P.6).”

CAUTION:

DO not perform “rotation + hammering“ action with the drill chuck, or the chuck will probably be damaged.

I	\	Drill chuck
dFig. 12

9