Miller Electric OFR-210, HWY-210 manual Assembly Safety Precautions, Specifications, Symbol Usage

Page 7

SECTION 1 − ASSEMBLY SAFETY PRECAUTIONS

trail_safety 2/98

1-1. Symbol Usage

Means Warning! Watch Out! There are possible hazards with this procedure! The possible hazards are shown in the adjoining symbols.

YMarks a special safety message.

.Means “Note”; not safety related.

This group of symbols means Warning! Watch Out! possible FAL- LING EQUIPMENT and TILTING OF TRAILER hazards. Consult symbols and related instructions below for necessary actions to avoid the hazards.

1-2. Assembly Hazards

YThe symbols shown below are used throughout this manual to call attention to and identify possible hazards. When you see the symbol, watch out, and follow the related instructions to avoid the hazard.The safety information given below is only a summary of the more complete safety information found in the Safety Standards. Read and follow all Safety Standards.

YOnly qualified persons should install, operate, maintain, and repair this unit.

YDuring operation, keep everybody, especially children, away.

FALLING UNIT can cause injury.

DUse equipment and blocks of adequate capac- ity and size to lift and support unit.

DIf using lift forks to move unit or parts, be sure forks are long enough to extend beyond oppo- site side of unit or parts to prevent tipping.

DHave two people of adequate physical strength lift trailer parts.

TILTING OF TRAILER can cause injury.

D Use tongue jack or blocks to support weight.

DProperly install welding generator onto trailer according to instructions.

READ INSTRUCTIONS.

D Use only genuine MILLER replacement parts.

DPerform maintenance according to this manual.

FLYING METAL OR DIRT can injure eyes.

DWear approved safety glasses with side shields when assembling and maintaining trail- er.

Read and follow all Trailer Towing Safety Precautions at start of manual before using this trailer.

 

SECTION 2 − SPECIFICATIONS

 

 

 

 

 

 

 

2-1. Trailer Specifications

 

 

 

 

 

Specification

 

Description

 

 

 

 

 

Gross Axle Weight Rating

 

1500 lb (680 kg)

 

Gross Vehicle Weight Rating

 

1610 lb (730 kg)

 

Net Payload

 

1350 lb (612 kg)

 

Road Clearance

 

6-1/2 in (165 mm)

 

Height Of Bed

 

18-1/2 in (470 mm)

 

Standard Tires

 

4.8 − 12

 

Weight

 

Net: 265 lb (120 kg)

 

 

 

 

 

OM-699 Page 1

Image 7
Contents Description OM-699From Miller to You Trailer Towing can be hazardous Trailer Towing Safety PrecautionsOverloading can cause serious injury or equipment damage Incorrectly Working Lights can cause accidents Unexpected Tilting of Trailer can cause injury and damagePRE-TOWING Checklist Page Assembly Hazards − Assembly Safety Precautions− Specifications Symbol UsageOverall Dimensions Assembling Trailer − AssemblyInstalling Hitch And Safety Chains Right Installing Optional Light KitInstalling Welding Generator Installing Wiring Harness Tab ConnectorsSupport trailer with jack Block wheels Maintenance01 in 0.2 mm Hub is too loose Endplay maximum Torquing Wheel BearingsComplete Assembly − Parts ListPage Page Page Call Miller for your local Miller distributor Miller Electric Mfg. Co Owner’s Record