Miller Electric 3000-4AH manual Unexpected Tilting of Trailer can cause injury and damage

Page 4

Couplers

Clevis

OR

Trailer

 

Tongue

Lunette

Eye

Ball

Safety Pin

INCORRECT SIZE OR RATING OF HITCH can cause trailer to break loose from towing vehicle.

1.Be sure towing vehicle hitch is correct type, size, and rating to match coupler.

2.Be sure the hitch is properly installed onto towing vehicle.

3.On optional ball couplers, always insert hitch safety pin before towing.

4.Make sure hitch and ball are properly sized and match each other.

WHEELS MUST BE CHOCKED when trailer is uncoupled from vehicle.

1.Chock in direction of grade.

2.Position chock snugly behind tire.

3.Place chock square to the tire.

4.Tap chock into place.

5.For added protection, chock both sides of tire.

UNEXPECTED TILTING OF TRAILER can cause injury and damage.

1.When trailer is uncoupled from towing vehicle, use jack on front and block rear to prevent tilting.

2.Use proper blocks that are large enough and able to support the necessary weight.

3.Always chock the wheels when uncoupled.

Tail, Stop, And

Turn Lights

Side Marker Lights

Torquing Sequence

1

34-Hole Wheels –

4 Torque Lug Nuts

 

 

 

 

To 60 ft-lbs (81 N·m)

 

 

 

2

 

 

 

 

1

 

Lug

Wheel

3

4

5-Hole Wheels –

Bearings

 

 

Torque Lug Nuts

Nuts

 

 

Inside Hub

5

2

To 70 ft-lbs (95 N·m)

 

 

 

INCORRECTLY WORKING LIGHTS can cause accidents.

1.State and Federal regulations require trailers used on highways to have tail, stop, turn, and side marker lights.

2.Lights are not required for trailers designed for off-road use only.

3.Check all lights and connectors for proper installation and operation before using the trailer.

4.Check condition of wiring harness leads, plugs, and connections regularly. Repair or replace damaged parts or wires.

5.Replace any broken lenses, reflectors, or bulbs.

INCORRECT TORQUE on lug nuts or INCORRECT TIRE PRESSURE or BEARING MAINTENANCE can cause loss of control resulting in serious injury and equipment damage.

1.Recheck lug nut torque after first 50 miles (80 km) and once each year or every 12,000 miles (19,500 km) thereafter, whichever comes first.

2.When checking lug nuts, keep them clean, dry, and unlubricated.

3.Check and repack wheel bearings once each year or every 12,000 miles (19,500 km), whichever comes first.

4.Maintain correct tire pressure according to sidewall data on tire – underinflation is the most common cause of tire trouble.

5.Check tires for wear every six months.

6.Use only replacement tires of the same size, rating, and capacity.

Self-Actuating Hydraulic

Brake System

Brake Fluid

BreakawayReservoir

Cable

Surge-Type

Coupler

Bracket

INOPERATIVE SURGE-TYPE BRAKES OR WRONG BREAKAWAY CABLE CONNECTION can cause accidents.

1.Check brake fluid level before use.

2.Do not use sway control devices – keep coupler free to telescope during braking.

3.Always connect breakaway cable to towing vehicle – be sure it has a direct free pull.

4.Do not wrap cable around safety chains, tongue, wiring, or any other parts.

5.The breakaway cable automatically applies the trailer brakes if separation occurs.

safety_trailer 10/96

Image 4
Contents OM-659 DescriptionFrom Miller to You Trailer Towing can be hazardous Trailer Towing Safety PrecautionsOverloading can cause serious injury or equipment damage Unexpected Tilting of Trailer can cause injury and damage Incorrectly Working Lights can cause accidentsTable of Contents Page Specifications Safety InformationTrailer Installation & Operation Operating Parking Brake And JackInstalling Fenders And Lights Installing Fenders And LightsInstalling Optional Tool Box Installing Wiring Harness ConnectorsTilting of Trailer can result Health or killPersonal injury or equipment damage Installing Hitch And Connecting To Towing Vehicle Installing Welding Generator Installing Welding GeneratorMaintenance Block wheels when adjusting parking brakeTorquing Wheel Bearings Falling Equipment can causeParts List Complete AssemblyPart Description Quantity Optional Service SupportOwner’s Record Miller Electric Mfg. Co