Miller Electric 3000-4AH manual Installation & Operation, Operating Parking Brake And Jack

E

A

		Inches	Millimeters
D	A	20	508
C	B	13	330
	C	48-1/2	1232
	D	74	1879
	E*	158-1/2	4026

*150 in (3810 mm) Without Optional Hitch

B

Dimensions A and B will decrease when weight is added to trailer.

ST-148 258

Figure 2-1. Overall Dimensions

SECTION 3 – INSTALLATION & OPERATION

NOTE

All directions are given as facing the towing vehicle. The word “front” means the hitch end of the trailer.

3-1. Operating Parking Brake And Jack

WARNING

TILTING OF TRAILER can result in personal injury or equipment damage.

• Use adequate blocks or lifting device to support hitch end while pivoting trailer jack into position.

•Use trailer jack to obtain desired height and to support tongue weight.

rwarn1.1* 3/93

		1	Parking Brake
		Use brake to manually apply trailer
		brakes when trailer is parked.
		To use brake, push handle forward
		until handle is nearly horizontal.
		To release brake, pull handle back
		to vertical position.
		See Section 3-7 for parking brake
		adjustment procedure.
		2	Jack
		3	Securing Pin
1		Pull pin and rotate jack to vertical
		position. Insert pin to lock jack in
		place.
		4	Handle
		Turn handle to raise or lower trailer.
		When jack is not needed, pull pin
		and rotate jack to horizontal posi-
3	4	tion. Use pin to lock jack in place.
2
			Ref. ST-148 258

Figure 3-1. Operating Parking Brake And Jack

OM-659 Page 2