Maintenance, Accessories | Bosch Power Tools 11304KD specs

! WARNING

BM 1619929522 12/02 12/10/02 3:43 PM Page 8

Maintenance

Service

!WARNING Preventive maintenance performed by unauthorized

personnel may result in misplacing of internal wires and components which could cause serious hazard. We recommend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station.

TOOL LUBRICATION

Your Bosch tool has been properly lubricated and is ready to use. It is recommended that tools with gears be regreased with a special gear lubricant at every brush change.

CARBON BRUSHES

The brushes and commutator in your tool have been engineered for many hours of dependable service.

Your tool is equipped with a Pop-out brush system. The tool will shut off when brush replacement, lubrication and preventive maintenance are needed.

Only genuine Bosch replacement brushes specially designed for your tool should be used.

BEARINGS

Every second brush change, the bearings should be replaced at Bosch Factory Service Center or Authorized Bosch Service Station. Bearings which become noisy (due to heavy load or very abrasive material cutting) should be replaced at once to avoid overheating or motor failure.

Cleaning

!WARNING To avoid accidents always disconnect the tool from

the power supply before cleaning or performing any maintenance. The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through openings.

!CAUTION Certain cleaning agents and solvents damage

plastic parts. Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

Accessories

If an extension cord is necessary, a cord with adequate size conductors that is capable

of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3- wire extension cords that have 3-prong plugs and receptacles.

NOTE: The smaller the gauge number, the heavier the cord.

RECOMMENDED SIZES OF EXTENSION CORDS

120 VOLT ALTERNATING CURRENT TOOLS

Tool’s	Cord Size in A.W.G.				Wire Sizes in mm2
Tool’s
Ampere
Ampere	Cord Length in Feet				Cord Length in Meters
Rating	Cord Length in Feet				Cord Length in Meters
	25	50	100	150	15	30	60	120
3-6
3-6	18	16	16	14	.75	.75	1.5	2.5
6-8	18	16	14	12	.75	1.0	2.5	4.0
8-10	18	16	14	12	.75	1.0	2.5	4.0
10-12	16	16	14	12	1.0	2.5	4.0	—
12-16	14	12	—	—	—	—	—	—

* Hammer hauler (Model 11304K only)

(*= standard equipment) (**= optional accessories)

-8-

11304KD, 11304, 11304K specifications

Bosch Power Tools has long been a prominent name in the world of power tools, and models 11304K, 11304, and 11304KD are no exception. These versatile tools are designed for professionals and DIY enthusiasts alike, offering a robust set of features and cutting-edge technology that enhances performance and durability.

The Bosch 11304K and its variants are primarily designed as pneumatic tools used for both drilling and chiseling applications. One of the main features of these models is their high-impact energy output, which allows for efficient chiseling and demolition tasks. With a powerful motor, these tools provide consistent performance, making them suitable for various materials, including concrete and masonry.

One standout characteristic is the ergonomic design of the 11304 series. These tools include a rubberized grip, which reduces vibration and allows for extended use without discomfort. Additionally, the lightweight construction of the 11304K model ensures that users can maneuver the tool easily without experiencing fatigue during prolonged tasks. This design approach not only enhances user comfort but also increases precision during operation.

The 11304 also features an advanced selector for different chisel positions. This allows users to adjust the chisel angle, ensuring optimal efficiency for different applications. Whether you are chipping, scraping, or performing light demolition, having adjustable positions enhances the versatility of the tool.

Bosch incorporates innovative technologies in the 11304K and the other models in this series. For instance, the pneumatic hammer mechanism minimizes energy loss, ensuring that maximum power is delivered to the workpiece. This results in faster drilling and chiseling, significantly improving productivity on the job site.

Furthermore, the tools come with an integrated dust management system, which helps maintain a cleaner workspace and prolongs the life of the tool by preventing dust accumulation. This feature is particularly valuable when working in confined spaces or indoor environments where dust control is a priority.

In conclusion, Bosch Power Tools 11304K, 11304, and 11304KD models exemplify the brand’s commitment to quality and innovation. With their robust performance, ergonomic design, and advanced features, these tools effectively meet the needs of modern construction and renovation professionals. Whether you are tackling heavy-duty projects or detailed finishing work, Bosch's 11304 series elevates productivity while ensuring user comfort and control.