Simer Pumps 2355-04, 2305-04, 2300-04, 2310-04 owner manual Operation, Troubleshooting, Airlocks

Page 4

Operation

4

2.The pump will not remove all water. On a flat surface Model Nos. 2300, 2305, and 2310 will pump down to within 1/8" of the pumping surface. Model No. 2355 will pump down to within 5/8" of the pumping surface.

NOTICE: For long cycle times, the pump must be submerged to prevent the motor from overheating. A fully submerged pump is preferred for proper cooling when a pump runs for a long time.

AIRLOCKS

When a pump airlocks, it runs but does not move any water. An airlock will cause the pump to overheat and fail. The pumps have a built in anti-airlock hole. See Figure 1 for the location of the hole. Water leakage from the anti- airlock hole is normal.

If you suspect an airlock, unplug the pump, clean out the anti-airlock hole with a paper clip or a piece of wire, and restart the pump.

Anti-Airlock Valve (Remove screen and look under pumpfor access)

Figure 1: Unsnap screen with screwdriver and tap out to clean it. Be sure all snaps catch when reinstalling it.

Dewater flat roofs

Roofs

EmptyBasementsflooded rooms

3696 0500 NEW

Figure 2:Typical uses

Troubleshooting

SYMPTOM

PROBABLE CAUSE(S)

CORRECTIVE ACTION

Pump won’t start or run.

Pump is not plugged in.

Check and see if pump is plugged in to a proper outlet.

 

Blown fuse.

If blown, replace with fuse of proper size or reset breaker.

 

Low line voltage.

If voltage is under recommended minimum. Check size of

 

 

wiring from main switch on property. If OK, contact power

 

 

company or hydro authority.

 

Defective motor.

Replace pump.

 

 

 

Pump operates but

Restricted discharge

Remove pump and clean pump and piping.

delivers little or no water.

(obstacle or ice in piping).

 

 

Restricted intake.

Remove the pump and clean out the intake screen.

 

Low line voltage.

The voltage is under recommended minimum. Check size of

 

 

wiring from main switch on property. If OK, contact power

 

 

company or hydro authority.

 

Worn or plugged impeller.

Replace pump.

 

The anti-airlock hole is plugged.

Turn off the pump, clean out the anti-airlock hole, and

 

 

restart the pump.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

Page 3 Page 5
Image 4
Page 3 Page 5
Contents MOD -04, 2305-04, 2310-04 Submersible Utility PumpsSafety / General Information Installation Installation / OperationOperation Operation TroubleshootingAirlocks Repair Parts Model Numbers 2300-04 2305-04Warranty Limited WarrantySécurite / Consignes générales Lire Toutes CES Instructions ET LES SuivreCaractéristiques RendementInstallation / Fonctionnement FonctionnementRecherche des pannes FonctionnementBouchon Dair Pièces de rechange Numéros de modèle 2300-04 2305-04Garantie Garantie LimitéeSeguridad Instalación Información general / InstalaciónOperación Localización de fallas Instalación / OperaciónBolsas DE Aire Airlock Piezas para reparaciones Modelos números 2300-04 2305-04Garantía Garantía Limitada

2310-04, 2300-04, 2305-04, 2355-04 specifications

Simer Pumps has established itself as a reliable name in the field of water transfer and quality performance pumps. Among their range, the Simer Pumps 2310-04, 2300-04, 2355-04, and 2305-04 models stand out for their impressive features and advanced technologies tailored to meet a variety of pumping needs.

The Simer 2310-04 model is designed for efficient performance in water movement applications. It features a robust motor that provides high efficiency and low energy consumption, making it ideal for residential and light commercial uses. This model is particularly noted for its durable construction that ensures longevity and resistance to wear and tear. The integrated thermal overload protection is an added advantage, safeguarding the pump from overheating and ensuring safety during operation.

Next in line, the Simer 2300-04 is a versatile pump known for its reliable operation. This model is especially effective in transferring clear water and is suitable for various applications, including irrigation, water supply, and construction sites. It boasts a compact design that allows for easy installation and relocation. In addition, its corrosion-resistant materials extend its lifespan, making it a cost-effective choice for users who demand durability without compromising performance.

The Simer 2355-04 model takes things further with enhanced features, catering to more demanding applications. This model is equipped with a powerful motor that allows for higher flow rates, making it ideal for heavier tasks. Its unique impeller design minimizes turbulence and maximizes efficiency, ensuring that water is moved quickly and effectively. Additionally, the pump has been engineered to offer quiet operation, reducing noise pollution—a significant advantage for urban or residential settings.

Lastly, the Simer 2305-04 model combines reliability with cutting-edge technology. It is characterized by its self-priming capabilities, ensuring ease of use by eliminating the need for manual priming before operation. This model also features adjustable flow settings, allowing users to optimize performance according to specific needs. The inclusion of a high-efficiency motor not only enhances performance but also contributes to lower energy costs—an essential factor for eco-conscious consumers.

With these models, Simer Pumps continues to push the boundaries of efficiency, performance, and user-friendliness. Each pump is designed with end-user needs in mind, ensuring that customers receive a product that meets their specific requirements while providing excellent value. Whether for light domestic use or more intensive applications, Simer's range of pumps delivers on the promise of quality and reliability.
Top Page Image Contents