Grizzly G0513X2B manual Replaces Test Run, Motor Brake, To test run the machine

Page 12

(Replaces Test Run

on Page 21)

To test run the machine:

1.Follow Steps 1-5on G0513X Manual Page 26.

2.Verify that the machine is operating correctly by turning the switch disabling key (Figure 8) to "1" and turning the machine ON.

—When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises.

—Investigate and correct strange or unusual noises or vibrations before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

Figure 8. G0513X2 switch disabling key and

ON/OFF switch.

3.Press the OFF button to stop the machine.

4.WITHOUT resetting the OFF button, press the ON button. The machine should not start.

—If the machine does not start, the OFF but- ton safety feature is working correctly.

—If the machine does start (with the stop button pushed in), immediately disconnect power to the machine. The OFF button safety feature is not working correctly. This safety feature must work properly before proceeding with regular operations. Call Tech Support for help.

5.Twist the OFF button clockwise so it pops out. When the OFF button pops out, the switch is reset and ready for operation (see

Figure 9).

WIS

T

T

OFF Button

Figure 9. Resetting the switch.

6.Turn the switch disabling key to "0", as shown in Figure 8.

7.Try to turn the machine ON.

—If the bandsaw does not start, the switch disabling feature is working as designed. The Test Run is complete.

—If the bandsaw starts, immediately discon- nect power. The switch disabling feature is not working correctly. This safety feature must work properly before proceeding with regular operations. Call Tech Support for help.

Motor Brake

The motor brake is activated automatically when the OFF button is pushed.

-12-

Model G0513X2B (Mfg. Since 5/11)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model G0513X2B Bandsaw $&+,1$7$ Table Information Safety Instructions for Machinery Replaces onChildren & BYSTANDERS. @ZZe XaYgZc ZghWZXdbZVYhigVXidc#Additional Safety for Bandsaws Phase Plug/Receptacle Nema Cord Wire, 14 AWG, 300VAC, S-TypeFull-Load Current Rating at 220V.... .7 Amps Nominal Voltage 220V/240VMinimum Gauge Size 14 AWG 50 ftCrate Contents Figure Qty Replaces InventoryHardware and Tools Qty Replaces Installing Fence on Replaces Table onReplaces Positive Stop on Power Connection Guide Post HandwheelReplaces Test Run Motor BrakeTo test run the machine Disabling & Locking Switch Replaces Aligning Fence onTo align the fence parallel with the miter slot Pointer Calibration To calibrate the pointerTo lubricate the tension adjustment assem- bly Replaces Lubrication onTo lubricate the blade guide rack and pinion To lubricate the blade tracking knobMagnetic Brake Adjustment Tools NeededWiring Wiring Safety InstructionsControl panel wiring G0513X2B Electrical ComponentsG0513X2B Wiring Diagram 220V, 1-Ph 220 VACPlug As recommendedMain Breakdown Main Parts List DescriptionDescription Fence-Guides Breakdown Fence-Guides Parts List Trunnion Breakdown Labels Breakdown Accessories Eye protection assortmentOrder Hours a DAY

G0513X2B specifications

The Grizzly G0513X2B is a powerful and versatile bandsaw that caters to the needs of both professional woodworkers and hobbyists. Known for its robust construction and cutting capabilities, this machine is a staple in workshops around the world.

One of the standout features of the G0513X2B is its impressive 2 HP motor, which provides ample power to tackle a variety of cutting tasks. The motor is designed to operate on both 120V and 240V power, giving users flexibility based on their workshop setup. With a maximum cutting height of 12 inches and a maximum cutting width of 16 inches, this bandsaw can accommodate larger workpieces, making it ideal for resawing lumber, cutting curves, and creating intricate designs.

The G0513X2B is equipped with an impressive 14-inch resaw capacity, thanks to its high fence and superior blade design. The precision-ground cast iron table provides a stable support base, ensuring that users can make accurate and repeatable cuts. Additionally, the table tilts from 0 to 45 degrees, which further enhances its versatility for bevel cuts.

Another notable technology in the Grizzly G0513X2B is its ball-bearing blade guides. These guides promote smoother operation and improve precision while significantly reducing friction, which can extend the life of the blade. The oversized upper and lower blade wheels are also a key feature, as they enhance the stability of the blade and reduce vibration during operation.

The bandsaw also includes an easy-to-use tension adjustment mechanism, which allows for quick changes of the blade tension based on the material and specific cutting needs. This feature is complemented by an integrated rack-and-pinion guide system, facilitating smooth and precise adjustments to the cutting height and angle.

Safety is a paramount concern in any woodworking environment, and the G0513X2B does not disappoint. It is equipped with a safety blade guard that can be easily adjusted, ensuring that users maintain a safe distance from the blade during operation. The design also incorporates a foot brake that quickly halts the blade upon release of the power switch, adding an extra layer of safety.

In conclusion, the Grizzly G0513X2B stands out with its robust motor, high resaw capacity, and precision features. It's an exceptional choice for anyone looking to enhance their woodworking capabilities with a reliable and efficient bandsaw.
Top Page Image Contents