Grizzly G0513X2B manual Guide Post Handwheel, Power Connection

3.Thread the fence handle into the fence, then tighten the hex nut against the fence pivot block (see Figure 4).

Figure 4. Fence handle components.

4.Install the resaw fence lock handle (with the washer and moving plate) onto the fence, then slide the resaw fence over the moving plate as shown in Figure 5.

Note: Leave the moving plate and lock han- dle loose enough to slide on the fence.

Figure 5. Attaching resaw fence to standard

fence.

5.Tighten the resaw lock handle.

6.Pull the fence handle up and place the fence assembly on the rail.

7.Push the fence handle down to lock the fence assembly in place.

Guide Post

Handwheel

Secure the guide post handwheel onto the flat part of the handwheel shaft with the M6-1 x 20 cap screw.

Model G0513X2B (Mfg. Since 5/11)

Power Connection

6[iZg ndj ]VkZ XdbeaZiZY Vaa egZk^djh hZije ^chigjXi^dchVcYX^gXj^igZfj^gZbZcih!i]ZbVX]^cZ ^hgZVYnidWZXdccZXiZYidi]ZedlZghjeean#

Id Vkd^Y jcZmeZXiZY hiVgijeh dg egdeZgin YVb" V\Z!jhZi]Z[daadl^c\hiZehl]ZcZkZgXdccZXi^c\ dgY^hXdccZXi^c\i]ZbVX]^cZ#

Connecting Power

1. Ijgci]ZbVX]^cZedlZghl^iX]OFF#

2. >chZgi i]Z edlZg XdgY eaj\ ^cid V bViX]^c\ edlZg hjeean gZXZeiVXaZ# I]Z bVX]^cZ ^h cdlXdccZXiZYidi]ZedlZghdjgXZ#

Figure 6. Connecting power.

Disconnecting Power

1. Ijgci]ZbVX]^cZedlZghl^iX]OFF#

2. <gVhei]ZbdaYZYeaj\VcYejaa^iXdbeaZiZan djid[i]ZgZXZeiVXaZ#9dcdiejaaWni]ZXdgY Vhi]^hbVnYVbV\Zi]Zl^gZh^ch^YZ#

Figure 7. Disconnecting power.

-11-