Grizzly G0513X2B manual Replaces Lubrication on, To lubricate the blade guide rack and pinion

Page 15

(Replaces

Lubrication on Page

45)

To lubricate the blade guide rack and pinion:

1.DISCONNECT BANDSAW FROM POWER!

2.Lower the blade guide until it reaches the table.

3.Wipe off any existing grease and sawdust buildup on the rack (see Figure 13).

Rack

Figure 13. Rack lubrication location.

4.Apply a thin coat of light all-purpose grease to the rack.

5.Move the blade guide up and down several times to distribute the grease, then remove any excess grease to help prevent sawdust buildup.

To lubricate the blade tracking knob:

1.DISCONNECT BANDSAW FROM POWER!

2.Loosen the blade tracking lock lever, then unscrew the blade tracking knob 5 turns.

3.Wipe off any existing grease and sawdust buildup on the threads.

4.Apply a few dabs of a light all-purpose grease to the threads.

5.Re-adjust tracking (see Blade Tracking on G0513X Manual Page 22).

Model G0513X2B (Mfg. Since 5/11)

To lubricate the tension adjustment assem- bly:

1.DISCONNECT BANDSAW FROM POWER!

2.Open the top wheel cover and look through the top of the wheel.

3.Wipe off any existing grease and sawdust buildup on the blade tension adjustment assembly and tension lever cam.

4.Apply a thin coat of grease to the tension adjustment assembly and tension lever cam (see Figure 14).

Tension

Lever Cam

Tension

Adjustment

Assembly

Figure 14. Tension adjustment assembly locations (top wheel removed for clarity).

To lubricate the trunnions:

1.DISCONNECT BANDSAW FROM POWER!

2.Move the table up until it reaches its maximum 45˚ angle and wipe off all excess grease and sawdust from the trunnions.

3.Apply a thin coat of light all purpose grease to the trunnions (see Figure 15).

Figure 15. Trunnion lubrication location.

4.Move the table down and up to distribute the grease, then wipe off any excess grease.

-15-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model G0513X2B Bandsaw $&+,1$7$ Table Information Replaces on Safety Instructions for MachineryZghWZXdbZVYhigVXidc# Children & BYSTANDERS. @ZZe XaYgZcAdditional Safety for Bandsaws Nominal Voltage 220V/240V PhasePlug/Receptacle Nema Cord Wire, 14 AWG, 300VAC, S-Type Full-Load Current Rating at 220V.... .7 Amps50 ft Minimum Gauge Size 14 AWGCrate Contents Figure Qty Replaces InventoryHardware and Tools Qty Replaces Installing Fence on Replaces Table onReplaces Positive Stop on Guide Post Handwheel Power ConnectionReplaces Test Run Motor BrakeTo test run the machine Disabling & Locking Switch Replaces Aligning Fence onTo align the fence parallel with the miter slot To calibrate the pointer Pointer CalibrationTo lubricate the blade tracking knob To lubricate the tension adjustment assem- blyReplaces Lubrication on To lubricate the blade guide rack and pinionTools Needed Magnetic Brake AdjustmentWiring Safety Instructions WiringG0513X2B Electrical Components Control panel wiringAs recommended G0513X2B Wiring Diagram 220V, 1-Ph220 VAC PlugMain Breakdown Description Main Parts ListDescription Fence-Guides Breakdown Fence-Guides Parts List Trunnion Breakdown Labels Breakdown Eye protection assortment AccessoriesOrder Hours a DAY

G0513X2B specifications

The Grizzly G0513X2B is a powerful and versatile bandsaw that caters to the needs of both professional woodworkers and hobbyists. Known for its robust construction and cutting capabilities, this machine is a staple in workshops around the world.

One of the standout features of the G0513X2B is its impressive 2 HP motor, which provides ample power to tackle a variety of cutting tasks. The motor is designed to operate on both 120V and 240V power, giving users flexibility based on their workshop setup. With a maximum cutting height of 12 inches and a maximum cutting width of 16 inches, this bandsaw can accommodate larger workpieces, making it ideal for resawing lumber, cutting curves, and creating intricate designs.

The G0513X2B is equipped with an impressive 14-inch resaw capacity, thanks to its high fence and superior blade design. The precision-ground cast iron table provides a stable support base, ensuring that users can make accurate and repeatable cuts. Additionally, the table tilts from 0 to 45 degrees, which further enhances its versatility for bevel cuts.

Another notable technology in the Grizzly G0513X2B is its ball-bearing blade guides. These guides promote smoother operation and improve precision while significantly reducing friction, which can extend the life of the blade. The oversized upper and lower blade wheels are also a key feature, as they enhance the stability of the blade and reduce vibration during operation.

The bandsaw also includes an easy-to-use tension adjustment mechanism, which allows for quick changes of the blade tension based on the material and specific cutting needs. This feature is complemented by an integrated rack-and-pinion guide system, facilitating smooth and precise adjustments to the cutting height and angle.

Safety is a paramount concern in any woodworking environment, and the G0513X2B does not disappoint. It is equipped with a safety blade guard that can be easily adjusted, ensuring that users maintain a safe distance from the blade during operation. The design also incorporates a foot brake that quickly halts the blade upon release of the power switch, adding an extra layer of safety.

In conclusion, the Grizzly G0513X2B stands out with its robust motor, high resaw capacity, and precision features. It's an exceptional choice for anyone looking to enhance their woodworking capabilities with a reliable and efficient bandsaw.
Top Page Image Contents