General Safety, Specifications, Description

Safety

GENERAL SAFETY

Electrically powered utility pumps normally give many years of trouble-free service when correctly installed, maintained, and used. However, unusual circumstances (interruption of power to the pump, dirt/debris, flooding that exceeds the pump’s capacity, electrical or mechani- cal failure in the pump, etc.) may prevent your pump from functioning normally. To prevent possible water damage due to flooding, consult your retailer about a secondary AC pump, a DC backup pump, and/or a high water alarm. See the “Troubleshooting Chart” in this manual for information about common pump problems and remedies. For more information, see your retailer or call Simer customer service at 1-800-468-7867.

1.Know the pump application, limitations, and poten- tial hazards.

Risk of fire or explosion. Do not use in explosive atmospheres. Pump water only with this pump. Failure to follow this warning can result in personal injury and/or property damage.

2.Make certain power source conforms to requirements of your equipment.

3.Disconnect power before servicing.

4.Release all pressure within system before servicing any component.

5.Drain all water from system before servicing.

6.Secure discharge line before starting pump. An unse- cured discharge line will whip, possibly causing per- sonal injury and/or property damage.

7.Check hoses for weak or worn condition before each use, making certain all connections are secure.

8.Periodically inspect pump and system components. Keep pump and system free of debris and foreign objects. Perform routine maintenance as required.

9.Provide means of pressure relief on pumps whose dis- charge line can be shut-off or obstructed.

10.Personal Safety:

a.Wear safety glasses at all times when working with pumps.

b.Keep work area clean, uncluttered and properly lighted – replace all unused tools and equipment.

c.Keep visitors at a safe distance from the work area.

d.Make workshop child-proof – with padlocks, mas- ter switches, and by removing starter keys.

11.When wiring an electrically driven pump, follow all electrical and safety codes, as well as most recent National Electrical Code (NEC) and Occupational Safety and Health Act (OSHA).

Pump motor is equipped with an auto- matic resetting thermal protector and may restart unexpectedly.

12. Hazardous voltage. Can shock, burn or cause death. This equipment is only for use on 115 volt (single phase) and is equipped with an approved 3-conductor cord and 3-prong,grounding-type plug.

Hazardous voltage. Can shock, burn or cause death. To reduce risk of electric shock, be cer- tain that it is connected to properly grounded, grounding-type receptacle.

Where a 2-prong wall receptacle is encountered, it must be replaced with properly grounded 3-prong receptacle installed in accordance with the National Electrical Code and local codes and ordinances.

13.All wiring should be performed by a qualified electrician.

14.Protect electrical cord from sharp objects, hot sur- faces, oil, and chemicals. Avoid kinking cord. Replace or repair damaged or worn cords immediately.

15.Use wire of adequate size to minimize voltage drop at motor. Refer to most recent National Electrical Code.

16.Do not touch an operating motor. Modern motors can operate at high temperatures.

SPECIFICATIONS

Power supply required		115V, 60 HZ.
Motor duty		Continuous
Liquid Temp. Range		Max. 77°F (25°C)
Operation Position		Vertical
Individual Branch Circuit Required		15 Amp
Operating Depth	Beginning min	1/2"
(water level)	Ending max	3/8"
Discharge		3/4" Garden Hose

DESCRIPTION

The submersible pump is designed for water removal in drainage basins, aquariums, hot tubs, cisterns, basements and flooded areas. Pump can be used for emergency ser- vice and dewatering. Unit is constructed of hi-impact corrosion resistant plastic. The screened inlet prevents large solids from entering pump.

NOTICE: This unit is not designed for applications involv- ing salt water or brine! Use with salt water or brine will void warranty.

PERFORMANCE

	GPH (LPH) AT TOTAL FEET (M)
0'	2'	4'	6'	8'	10'
(0)	(.61)	(1.22)	(1.83)	(2.85)	(3.56)
390 gal	330 gal	270 gal	192 gal	96 gal	12 gal
(1 478 L)	(1 251 L)	(1 023 L)	(728 L)	(364 L)	(46 L)

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2110 specifications

The Simer Pumps 2110 is a popular choice among homeowners and professionals alike, known for its reliability and efficiency in various water management applications. This submersible pump is designed primarily for dewatering tasks, making it essential in settings such as residential basements, construction sites, and agricultural fields.

One of the key features of the Simer Pumps 2110 is its robust construction. The pump is built with high-quality materials that resist corrosion and wear, ensuring longevity even in harsh environments. Its durable thermoplastic body is designed to handle heavy-duty pumping tasks while being lightweight enough to facilitate easy handling and installation.

The Simer Pumps 2110 boasts a powerful motor that delivers impressive performance, enabling it to handle substantial water volumes. With a pumping capacity of up to 1,600 gallons per hour, this pump is capable of quickly removing excess water and preventing flood damage. The efficient design minimizes energy consumption, making it not only a powerful tool but also an economical choice for users who need to manage water effectively.

In terms of technology, the Simer Pumps 2110 incorporates an innovative float switch mechanism that automatically activates the pump when water levels rise beyond a preset point. This feature allows for hands-free operation, providing peace of mind for users who may be away from the property or engaged in other activities. The float switch is designed for reliability, ensuring that the pump remains operational even in fluctuating water conditions.

The pump is also equipped with a thermal overload protection system. This feature protects the motor from overheating during prolonged use or when the pump is running dry, which can occur due to debris blockage or other unexpected circumstances. This safety measure further enhances the pump’s durability, making it a dependable choice for long-term use.

Moreover, the Simer Pumps 2110 is designed for ease of maintenance. Its user-friendly components allow for simple inspections and repairs, minimizing downtime and ensuring that users can address any issues quickly.

In summary, the Simer Pumps 2110 distinguishes itself with its robust construction, powerful motor, automatic float switch, thermal overload protection, and user-friendly maintenance features. Whether for residential or commercial purposes, this pump provides a reliable solution to water management challenges, ensuring efficient and effective operation.