Installation / Operation, Maintenance | Simer Pumps 2110 specs

Installation / Operation

INSTALLATION

Hazardous voltage. Can shock, burn or cause death. Do not use power cord to lift motor. Always use the handle.

1.Pump should be located and should rest on level solid foundation. Do not suspend pump by means of discharge pipe or power cord. Keep pump inlet screen clear.

2.Use a standard 3/4" garden hose or a 1" ID hose for the side discharge.

NOTICE: To keep friction as low as possible, hose must be 3/4" or larger. Keep the hose as short as possible.

3.If, in your application, backflow is a problem when the pump stops, prevent it by installing a 1" NPT check valve in the pump discharge pipe.

4.Power Supply: Pump is designed for 115V., 60 HZ. operation and requires an individual branch circuit of 15 amperes or more capacity. It is supplied with a 3-wire cord set with grounding-type plug for use in a 3-wire, grounded outlet. A 3 wire extension cord, of at least 14 AWG (2mm2) size is suggested, with larg- er sizes for runs over 25 ft (7M). For safety, the pump should always be electrically grounded to a suitable electrical ground such as a grounded water pipe or a properly grounded metallic raceway, or ground wire system. Do not cut off the round grounding prong.

Personal injury. The pump motor is equipped with automatic resetting thermal protec- tor and may restart unexpectedly. The protector trip- ping is an indication of motor overloading as a result of operating pump at low heads (low discharge re- striction), excessively high or low voltage, inade- quate wiring, incorrect motor connections, or a defective motor or pump.

* Lake Chemical Co., Chicago, Illinois

OPERATION

Hazardous voltage. Can shock, burn or cause death. Do not handle pump or pump motor with wet hands or when standing on wet or damp surface, or in water. Disconnect power from pump before handling or servicing pump.

The Geyser JuniorTM is fully automatic in operation. The pump will continue to run until the water is pumped down to 3/8" deep, and then it stops.

NOTICE: When you plug the pump into the wall outlet, it will operate continuously, whether partly or fully submerged.

1.The motor is equipped with an automatically reset- ting thermal overload protector. If the motor gets too hot, the overload protector will stop the motor before it is damaged. When the motor has cooled sufficiently, the overload protector will reset itself and the motor will restart.

NOTICE: If the overload protector stops the pump repeatedly, disconnect the power from the pump and check it to find the problem. Low voltage, long exten- sion cords, clogged impeller, too much back pressure in the discharge hose (as when pumping through 50’ (15 M) of coiled hose), or extended running of pump with no load, can all cause overheating.

2.The water being pumped cools the motor, allowing the pump to run continuously at any depth of water above 3/8". However, if the motor overload stops the pump, allow it to cool for one hour before restarting. Motor will not restart before the overload has cooled.

MAINTENANCE

A clogged inlet can reduce the pump’s performance. A clogged inlet screen can usually be cleaned out by back flushing with a garden hose through the pump’s dis- charge pipe.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2110 specifications

The Simer Pumps 2110 is a popular choice among homeowners and professionals alike, known for its reliability and efficiency in various water management applications. This submersible pump is designed primarily for dewatering tasks, making it essential in settings such as residential basements, construction sites, and agricultural fields.

One of the key features of the Simer Pumps 2110 is its robust construction. The pump is built with high-quality materials that resist corrosion and wear, ensuring longevity even in harsh environments. Its durable thermoplastic body is designed to handle heavy-duty pumping tasks while being lightweight enough to facilitate easy handling and installation.

The Simer Pumps 2110 boasts a powerful motor that delivers impressive performance, enabling it to handle substantial water volumes. With a pumping capacity of up to 1,600 gallons per hour, this pump is capable of quickly removing excess water and preventing flood damage. The efficient design minimizes energy consumption, making it not only a powerful tool but also an economical choice for users who need to manage water effectively.

In terms of technology, the Simer Pumps 2110 incorporates an innovative float switch mechanism that automatically activates the pump when water levels rise beyond a preset point. This feature allows for hands-free operation, providing peace of mind for users who may be away from the property or engaged in other activities. The float switch is designed for reliability, ensuring that the pump remains operational even in fluctuating water conditions.

The pump is also equipped with a thermal overload protection system. This feature protects the motor from overheating during prolonged use or when the pump is running dry, which can occur due to debris blockage or other unexpected circumstances. This safety measure further enhances the pump’s durability, making it a dependable choice for long-term use.

Moreover, the Simer Pumps 2110 is designed for ease of maintenance. Its user-friendly components allow for simple inspections and repairs, minimizing downtime and ensuring that users can address any issues quickly.

In summary, the Simer Pumps 2110 distinguishes itself with its robust construction, powerful motor, automatic float switch, thermal overload protection, and user-friendly maintenance features. Whether for residential or commercial purposes, this pump provides a reliable solution to water management challenges, ensuring efficient and effective operation.