Unpack the Unit
CONSUMER NOTICE: These assembly instructions are designed for more than one torch model. Features shown MAY NOT be in your torch and will not be pro- vided by this company or at the place you purchased your torch.
■Remove torch and components from package.
■See carton for parts included with your unit.
■Take torch outdoors away from ignition sources.
■Turn fuel valve off. (Fig. 1)
Fig. 1 |
■Remove protective cap from top of propane cylinder. Save cap for use in storing. (Fig. 2)
Fig. 2 |
3150 INSTASTART™ |
SERIES |
Cap |
Soft |
Bag/Cover |
Citronella |
CAUTION
•SERVICE SAFETY
•Keep all connections and fittings clean. Inspect propane cylinder and torch propane connections for damage before attaching.
•During set up, check all connections and fittings for leaks using soapy water. Bubbles indicate a leak. Never use a flame.
Ring |
| |
Globe |
| |
| Corded | |
| Pole | |
Torch | Assembly | |
Bottom | Stake | |
Housing | ||
Assembly | ||
|
■Screw propane cylin- der into torch. Take care not to
Hand tighten only. (Fig. 3)
Fig. 3 |
■Set torch into bottom housing. (Fig. 4)
Fig. 4 |
Base |
To Set Up
DANGER
■Remove seal from Citronella ring. (Fig. 5)
Fig. 5
■Place Citronella ring inside torch. (Fig. 6)
Fig. 6 |
•CARBON MONOXIDE HAZARD
•For outdoor use only.
•Never use inside house, camper, tent, vehicle or other unventilated or enclosed areas. This torch consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life.
■Note: Use Coleman 16.4 oz. disposable propane cylinders. The
CAUTION
•The propane torch must be set up in a vertical position to function properly.
•Do not place anything inside the torch other than a Citronella ring provided by Coleman.
•The Citronella ring will liquify and slowly evaporate during operation. Allow the torch to cool and the Citronella ring to solidify before moving or storing the torch.
•Do not attempt to refill the Citronella ring.