6330
RECHARGEABLE 60 LED WORK LIGHT
Unpacking
When unpacking, check the parts diagram and part number listing on page 4 to make sure all parts are included. If any parts are missing or damage, please call your distributor.
WARNING
Use 6330CH Charger only with 6330 LED Light
•For safe operation always read, follow, and understand instructions in the manual provided.
•The 6330CH charger is designed specifically for the 6330 light thus DO NOT attempt to charge any other product because personal injury or property damage may result.
•Do not expose to liquids including, but not limited to, water, rain, snow, etc.
•Before charging light, assure that the charger base is free of any foreign objects. Foreign objects made of conductive materials can cause an electrical short circuit.
•Risk of electric shock of 120V AC at terminal charger is present. Do not probe terminals.
•If any part of the unit, light, charger or cord, is damaged, do not attempt to charge; replace immediately.
•Do not use an extension cord with the battery charger.
•To avoid accidental tripping and/or damage to cord, make sure that the cord is located in an area where it will not be walked over.
•Do not pull cord to unplug, pull on plug.
RECHARGEABLE 60 LED WORK LIGHT
MADE IN CHINA
INSTRUCTIONS:
•The battery must be charged 6 to 8 hours before using the first time to insure proper operation.
•There are 60 LED elements on the light.
•Under normal usage the light will remain illuminated for approximately 3 hours after a 6 hour battery charge.
•When the battery indicator light is flickering in red light, the battery needs to be recharged.
•When the battery is fully charged,
the battery indicator light will turn green.
•Before storing the light for a prolonged period of time, be sure to fully charge the battery.
•Store the light in a dry clean area with the temperature between 32°F (0°C ) and 104°F (40°C).
•DO NOT submerge in water.
•DO NOT use solvents to clean any part of the light. Clean with a damp cloth and mild detergent.
•Intelligent Charger - Prevents battery overload
and
•Easy Battery Replacement System
•60 super bright LED 12000 MCD
•Single charge provides up to 3 hours of continuous use
•High light output with low energy consumption
•Minimal heat generated
•Unit uses 900 mAh replaceable
•Designed with complete discharge protection with indicator light
•UL listed 120V
•Removable battery pack provides simple replacement
•Recessed charging jack and on/off switch provides protection from damage caused by dropping
•CE listed
Page 2