DeWalt DW758 instruction manual Awg, Not Recommended

Page 4

English

•KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord. All visitors should be kept away from work area.

•STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place — out of reach of children.

•DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was intended.

•USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended.

•DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non- skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.

•USE SAFETY GLASSES. Also use face or dust mask if operation is dusty.

•DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

•SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool.

•DON’T OVERREACH. Keep proper footing and balance at all times.

•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.

•DISCONNECT OR LOCK OFF TOOLS when not in use, before servicing, and when changing accessories, such as blades, bits, cutters.

•REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

•AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is off when plugging in.

•EXTENSION CORDS. Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole receptacles that accept the tool’s plug. Replace or repair damaged cords. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Minimum Gauge for Cord Sets

Ampere

Volts

Total Length of Cord in Feet (meters)

120V

25 (7.6)

50 (15.2)

 

100 (30.5)

150 (45.7)

Rating

 

240V

50 (15.2)

100 (30.5)

 

200 (61.0)

300 (91.4)

 

 

 

More

Not

 

 

 

 

 

 

Than

More

 

 

AWG

 

 

 

Than

 

 

 

 

 

 

0

6

 

18

16

 

16

14

6

10

 

18

16

 

14

12

10

12

 

16

16

 

14

12

12

16

 

14

12

 

Not Recommended

•OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked.

•STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired.

•CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Guide D’UTILISATION Manual DE Instrucciones Page Definitions Safety Guidelines Important Safety InstructionsSafety Instructions For All Tools Read ALL InstructionsAWG Not RecommendedAdditional Safety Instructions for Grinders Keep Guards in Place and in working orderFor Future USE MotorComponents Fig Wheel 36 Grit Wheel 60 GritAssembly and Adjustments Installing Tool Rests FigBench Mounting RPMInstalling Spark Guards Fig Installing Eye Shields FigSwitch Fig OperationCleaning Changing Accessories , 5, 6 MaintenanceAccessories DW756 DW758 Repairs Three Year Limited WarrantyDW756 DW758 Wire Wheel BrushesBuffing Wheel Définitions lignes directrices en Matière de sécurité Lire Toutes LES DirectivesMise à la terre Importantes mesures de sécuritéMesures de sécurité pour tous les outils 15,2 Mesures de sécurité additionnelles relatives aux meuleusesNon Ou continu Conserver CES Consignes Pour Utilisation Ultérieure MoteurDescription Fig Assemblage ET AjustementsInstallation des pare-étincelles Fig Installation des appuis FigMontage sur établi Installation des écrans oculaires Fig Interrupteur FigUtilisation Alimenter uniformément la pièce contre le meuleRemplacement des accessoires , 5, 6 AccessoiresNettoyage Le retirer Laide Dune Clé HexagonaleSaisir Les ÉcrousRéparations Garantie limitée de trois ansContrat D’ENTRETIEN Gratuit D’UN AN Garantie DE Satisfaction DE 30 Jours OU Argent RemisModéle DW756 Modèle DW758Definiciones Normas de seguridad LEA Todas LAS InstruccionesInstrucciones de aterrizaje Instrucciones importantes de seguridadInstrucciones de seguridad para todas las herramientas No recomendado Mantenga LOS Protectores EN SU Sitio y en buen estadoInstrucciones adicionales de seguridad para esmeriladoras Guarde Estas Instrucciones Para Futuras Consultas Componentes FigInstalación de los pedestales de Descanso FigMontaje Y Ajustes Montaje en el bancoInstalación de los protectores contra chispas Fig Instalación de las cubiertas de protección ocular FigOperación Interruptor FigMantenimiento LimpiezaCambio de accesorios , 5, 6 Reparaciones Póliza de Garantía Garantía limitada por tres añosPara Otras Localidades Datos para ser llenados por el distribuidorAÑO DE Servicio Gratuito Garantia DE Satisfaccion SIN Riesgo POR 30 DiasEspecificaciones Piedras DE Esmeril Velocidad MÁX SeguraRuedas Para Pulir Cepillos DE AlambrePage 152 mm Mm71Page Ewalt Industrial Tool Co., 701 East Joppa Road, Towson, MD OCT14 Part No. N411717 DW756, DW758
Related manuals
Manual 26 pages 20.06 Kb

DW758 specifications

DeWalt is renowned for producing high-quality tools, and two of their standout products in the bench grinder category are the DW758 and DW756. These models epitomize durability and performance, making them ideal for both professional and home use.

The DeWalt DW758 is a powerful 8-inch bench grinder that operates at a robust 3,600 RPM, providing exceptional grinding capabilities. This model features a heavy-duty motor designed for a range of applications, including metal shaping, sharpening, and polishing. Its high-performance motor ensures consistent power delivery and enables users to work on tough materials with ease.

One of the primary characteristics of the DW758 is its cast iron base, which enhances stability during operation. This design not only minimizes vibrations but also prolongs the lifespan of the grinder. The grinder comes equipped with two 8-inch grinding wheels, permitting users to perform a variety of tasks without needing multiple tools. The included 36-grit and 60-grit wheels support different grinding applications, allowing for both coarse and fine finishes.

On the other hand, the DeWalt DW756 is an equally compelling option, featuring a slightly smaller design while still retaining impressive power. The DW756 operates at a speed of 3,450 RPM, making it suitable for handling general grindings tasks. Like its counterpart, this model also features a rugged cast iron base for stability and reduced vibration, ensuring a smoother grinding experience.

Both grinders utilize high-quality components such as the precision-machined shaft and balancing wheels, which contribute to their accuracy and efficiency. Additionally, the adjustable tool rests on both models allow users to customize their setups for optimal comfort and control. Safety features, including eye shields and toggle switches, are also standard, providing an added layer of protection for users.

In terms of versatility, both models are designed to accommodate a variety of accessories, making them adaptable to different tasks. With their robust build, powerful motors, and user-friendly features, the DeWalt DW758 and DW756 are excellent choices for anyone looking to enhance their workshop with reliable bench grinders. Whether for professional use or hobbyist projects, these grinders excel in performance, making them invaluable tools for achieving precise results.
Top Page Image Contents