DETACHABLE POWER CORD (Fig., 11)
The router has a detachableFig,, 11 power cord for easy carrying
and storage.
Note: Always attach the Detach- able Power Cord to the Router before connecting the Power Cord to the power source
Before turning the router on, connect the end of the power cord with two sockets to the power outlet located on the router motor's top cap (See indicator label on the Router)°
Electronic Variable Speed Control
The electronic speed control feature allows router motor speed to be matched to cutter size and material hardness for an improved finisl_ and extended bit life.
|
|
| I |
|
|
| Variable Speed Selection | Chart |
|
|
| Never exceed these bit speeds |
| |
Cutting | Bit | Diameter | Max.. Speed | |
Up to | 1 in. | (25mm) |
| 6 |
4 | - 5 | |||
24/2 in, | 2 | - 3 | ||
3 in. to | I | - 2 |
Reduce the speed when using extra large 1 in. plus, or heavy cutting bits° Chang- ing the router s rate of feed can also improve the quality, of the cut.
DIAL SETTING | RPM | APPLICATION |
|
| |
1 | 12,000 | metal, | hardwoods, | larger diameter | |
2 | 14,000 | cutting bits |
|
|
|
|
|
|
| ||
3 | 16,000 |
|
|
|
|
4 | 18,000 | Softwoods, | plastics, | countertops, | smaller diam- |
5 | 20,000 | eter cutting | bits |
|
|
|
|
|
| ||
6 | 25,000 |
|
|
|
|
The speed charts above indicate the relationship between speed settings and the
cutting application. Exact settings are determined by operator experience and
preference, and also by recommendations by manufacturers of cutting bits.
283_90 M anua LRevised_0743409 | Page 23 |