Craftsman 320.2819 operating instructions Table, large bits should be used for edging onlyo

Page 9

=PROVIDE CLEARANCE under work piece for muter cutting bit when through-cutting.

=KEEP CUTTING PRESSURE CONSTANT. Do not overload the motor.

•USE ONLY sharp cutting bits that are not chipped or cracked. Blunt cut- ting bits will cause stalling and burn the work piece.

•NEVER use this router motor with a cutting bit larger than 3-1/2 inch in diameter.

ALWAYS USE cutting bits that are designed for this router. Never use cutting bits which are larger in diameter than the opening in the muter sub-base. Cutting bits that have cutter diameters larger than the opening could cause possible loss of control or create other hazardous condition that could cause serious personal injury.

The sub-base on this fixed base router has an opening of 1-1/4 inch. To

use cutting bits with a larger diameter, install and use a sub-base with a larger

diameter opening (sold separately) at Sears stores or other Craftsman outlets,

DO NOT use large router cutting bits for freehand muting. Use of large cutting bits when freehand routing could cause loss of control or create haz-

ardous conditions that could result in serious personal injury. If using a router

table, large bits should be used for edging onlyo

BE SURE CUTTING BIT is centered in template guide (sold separately)

prior to template guide applications to avoid personal injury or damage to finished work.

DO NOT REMOVE more than 1/8 inch. in a single pass. Excessive depth of cut can result in loss of control that could result in personal injury.

After completing a cut, turn motor OFF and let it come to a complete stop BEFORE REMOVING router from work piece.

Let the motor come to a COMPLETE STOP before putting the router down. Cutting bits coast after power is turned off.

ONLY use router tables that conform to safe woodworking practices and

offer proper guarding for the cutting bit. Use router tables that are UL clas-

sified and identified suitable for use with this specific router model, Failure to comply could result in serious personal injury°

Only use router tables with on-board switch controlled receptacles.

Failure to use router tables with all the appropriate safety features could result in serious personal injury.

DISCONNECT THE TOOL FROM POWER SOURCE before making any

adjustments or changing cutting bits.

If you are changing a bit immediately after use, BE CAREFUL NOT TO TOUCH the collet!nut or cutting bit with your hands or fingers. The heat buildup from cutting could cause severe bums. ALWAYS use the wrench provided.

28190 Manual_Revised 07-0409

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Sears, Roebuck and Co., Hoffman Estates, IL Read ALL Instructions Reproductive harmDamage Prevention and Information Messages Symbol MeaningsPersonal Safety Work Area SafetyTool USE and Care Extension Cords Precautions when operating this toolService Safety Safety Symbols for Your ToolSafety Rules for Router Table, large bits should be used for edging onlyo Disconnect the Tool from Power Source before making anyAdditional Rules for Safe Operation Avoid Climb CUTTING. See Operation section in this manual28$90 ManuaLRevised0743409 ManuaLRevised Know Your Fixed Base Router Fig On/Off SwitchYourself with all Operating features and safety requirementsSelecting the Cutting BIT Instalung the Cutting BIT ING the Cutting BIT FigsCutting Bits COLLET/NUT CareInstalling Router Motor in Base Adjusting Depth of CUT Coarse AdjustmentMicro Adjustments Ring E To Adjust Depth Figs 6 and 6a Soft Start Feature Deep CutsTorque twist, customa.,-y in larger router LED Worklights Fig Live Tool IndicatorHEAVY-DUTY Edge Guide FigDial Setting Detachable Power Cord FigElectronic Variable Speed Control ApplicationEdge Routing or Internal Routing Placing the Router Onto the Workpiece and Starting the CUTBoth Control CausingAkWARNING Removing Cutting Bit from Work Personal injuryFreehand Routing with the Fixed Base Fig. i Edging wrrH a Pilot BIT Ternal Cuts Fig Feeding the Router FigAn internal cut Direction of FEED., Internal Cuts Figs. ! 7 nd 17aFeeding TOO Slow a Feeding TOO Fast FigAlways Chip Shield Deflector FigDust Collection with Dust Extraction AID Ppter FigTo adjust Depth with the Depth-Adjustment Wrenc Fig General Routine MaintenanceReplacement of Carbon Brushes Fig Same way they came out This will avoid a break4qperiodLubrication Installed Ion of Craftsman router ac Accessories Fixed Base Router Motor Unit 3703841000 3520!3000028i 3122924000Mo,,,t!ngPlate 28190ManuaLRevisecl07-0409Page43 Your Home CenterWv,w.sears,com

320.2819 specifications

The Craftsman 320.2819 is a notable power tool that stands out due to its versatility and performance in various applications. This particular model is recognized for its robust design and user-friendly features, making it a popular choice among both DIY enthusiasts and professional craftsmen.

One of the key features of the Craftsman 320.2819 is its powerful motor. With an output of 6.5 amps, the tool delivers considerable torque, enabling users to handle demanding tasks with ease. This motor produces high RPMs, allowing for efficient cutting and grinding, whether you are working on wood, metal, or plastic. The variable speed control further enhances its adaptability, permitting users to adjust the speed according to the material and the type of cut required.

Another distinguishing technology integrated within the Craftsman 320.2819 is the ergonomic design. It comes equipped with a comfortable grip handle that minimizes fatigue during extended use, allowing for precision and control. The lightweight construction of the tool aids in maneuverability, ensuring that users can operate it for longer periods without discomfort.

Durability is another hallmark of the Craftsman 320.2819. Built with high-quality components, it is engineered to withstand the rigors of heavy-duty use. The sturdy construction not only extends the life of the tool but also instills confidence in its reliability during complex projects. Its compact design allows for easy storage, making it a practical addition to any workshop.

Safety features are also at the forefront of the Craftsman 320.2819’s design. It incorporates a safety switch that prevents accidental startups, providing peace of mind when the tool is not in operation. Additionally, built-in dust protection mechanisms keep the internal components free from debris, ensuring optimal performance and longevity.

In conclusion, the Craftsman 320.2819 is a dependable power tool that combines power, versatility, and user-friendly features. Its high-performance motor, ergonomic design, durability, and safety mechanisms make it an excellent choice for anyone looking to tackle a variety of projects effectively. Whether you are a seasoned professional or a casual DIYer, this tool is engineered to meet and exceed expectations, bringing efficiency and ease to your crafting and building endeavors.
Top Page Image Contents