Cisco Systems 78, 828 manual Connecting a Server, PC, or Workstation

Chapter 2 Installation

Installing Your Router

Connecting a Server, PC, or Workstation

Before connecting the server, PC, or workstation, see Table 2-2 to determine how to set the router TO HUB/TO PC button.

To connect one of these devices, follow the steps in Figure 2-2.

Figure 2-2 Connecting a Server, PC, or Workstation

1. Set TO HUB/TO PC button. Cisco 828 router

TO HUB		ETHERNET 10	BASE T	Model
TO PC					Cisco
				CONSOLE		828
						G.
	4	3				SHDSL
			2
				1

2.Connect yellow cable to ETHERNET 4 port on Cisco 828 or SOHO 78 router.

+5 VDC

PC

ETH

0	OK	LAN
SER

AUX 56635

3.Connect other end of cable to server, PC, or workstation.

To verify your connection, ensure that the appropriate Ethernet LED is on after the router installation. For example, if you have connected the cable to Ethernet port 4, ensure that the ETHERNET 4 LED on the front panel is on.

If the LED is not on, see Table 3-2 in Chapter 3 for troubleshooting information.

Cisco 828 Router and SOHO 78 Router Hardware Installation Guide

2-8 78-12837-02