Craftsman 320. 28180 operating instructions Attaching the Fence to the Table Fig

ATTACHING THE FENCE TO Fig. 6 THE TABLE (Fig. 6)

,_ WARNING" Always unplug the router before at- taching or removing the fence° The fence has been shipped completely assembled.

1.Place the fence assembly on the table with the four

wing nuts facing toward you.

=Align the two holes on the bottom of fence assembly with the two channels on the router table.

Fig. 7

3_ Secure the fence to the table with two clamping knobs (5), two plain washers (11), and two short, round- head, square-neck bolts (6).

TO ATTACH THE MITER

GAUGE (Fig. 7)

The miter gauge has been shipped completely assembled.

Attach the miter gauge to the table by placing the miter-gauge bar in the slot on the table.

MOUNTING THE TABLE TO Fig. 8 A WORK SURFACE (See Fig. 8)

1.Place the router table, up- right, on a sturdy surface, e.g., work stand, work- bench, or counter top.

. While holding the router table in place, mark on the work surface the location of the two mounting holes (11/32-in diao) in each of the legs.

3.Remove the router table.