Craftsman 320. 28180 Using the Router with the Router Table, Routing Operation

Page 21

USING THE ROUTER WITH THE ROUTER TABLE

1.Read the and understand entire Product Manual for the router,

2.Always plug the router into the switched outlet in the router table° Never plug

a router-table-mounted router into another power source.

3.Make sure the router-table switch is off. Lock-on the router switch.

4.Plug the router-table cord into a power source°

5_ Turn on the power to the router table by pulling out the ON/OFF switch.

6.Always control the power to the router with the router-table switch whenever the router is mounted on the table.

ROUTING OPERATION

1.Read the and understand entire Product Manual for the router.

2.Adjust the fence to support the work piece to be cut.

NOTE: The work piece must always be held tight against the fence.

3.Reconfirm that all router adjustments are securely locked before supplying power to the router,

4.Feed the work piece from right to left.

WARNING" The direction of feed for the work piece is always against the sharp edges of the cutter and into the rotation of the cutter. Failure to follow this rule can result in serious personal injury.

28180 Manual_Revised_07-0228

Page21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Router Table Read ALL Instructionsi ONE Year Full Warranty on Craftsman ToolDamage Prevention and Information Messages Symbol MeaningsFrequency cycles per second Power Grounded tools Work Area SafetyDouble-insulated tools Personal Safety Minumum Gauge for Extension CordsAWG Tool USE and Care Safety WearyourKeep your hair, clothing, and gloves away from moving parts Specific Safety for the Router Table Service SafetyManualRevlsed07-022S Page10 This Router Table has the following features ManualRevised07-0228 Page12 Quantity DescriptionAttaching the Legs to the Table TOP To the Table Attaching the Router FigMounting the Table to a Work Surface See Fig Attaching the Fence to the Table FigTo operate the switch Switch OperationDust Shield 28/80 ManuatRevised07-0228 Page/8 To adjust the extended fence forward and backward Fig Adjusting the FenceTo laterally adjust the infeed and ouffeed fence To adjust the outfeed fence for joining FigAdjusting Cutting Height Routing Operation Using the Router with the Router TableGeneral Maintenance ProblemCause 28180ManualRevlsed07-0228Page23 Get it fixed, at your home or ours
Top Page Image Contents