=Drill a hole at each of the marked locations.
5.Place the router table on the work surface, and align the holes in the table legs with the holes in the work surface.
. Secure the router table to the work surface using four screws (not supplied).
7_ Securely tighten the screws°
SWITCH OPERATION
The switch has a safety key to help prevent accidentally switching the router ON and the unauthorized, possibly hazardous use by others°
The safety key must be completely inserted into the switch before the switch can be turned ON.
To operate the switch:
1.Insert the safety key into the switch. (Fig. 9)
2.To turn the router ON, pull out the ON/OFF switch. (Fig. 10)
Safety Key
Fig. 10
28180 Manual_Revised_07<)228 | Page17 |