Digimerge D4202 user manual Video WEB Server Settings

4. Click on “INTERNET PROTOCOL (TCP/IP)” and then select “Properties” to setup

5. Click on “Use the following IP address” and set the IP address and subnet mask

NOTE :

1. Before changing the PC network setting, please write down the original network setting in order to recover the original setting after the setup. (for static IP users)

2. The IP address should be 192.168.1.XXX. The setting of “XXX” could be set from 1 to 254 Do not use 10 since 192.168.1.10 is the default IP ); the subnet mask is 255.255.255.0.

STEP 3: VIDEO WEB SERVER SETTINGS

1.To configure the Server IP, please click twice to enter the setup.

2.Key in the User Name, Password, and Server IP (The default setting for the User Name is admin and the default Password is admin ; Server IP is 192.168.1.10, Port : 80). Click on

OK to connect.

-9-