APPENDIX #2 – SENDING E-MAIL
1) Connect the
Video Web Server
Pin 5
GND
N.O. Sensor
ALARM INPUT
Pin 4,7, 8 or 9
A normally open contact/sensor can be connected where
Pin 5 is Ground and Pin 4, 7, 8 and 9 is the Alarm Input
2) Set the “Mail setting ” item in the system configure.
digimerge.eng
digimerge.eng
dliu@digimerge. c o m
NOTE 1 | : You can get all the data from the ISP ( Internet Service Provider) company or by | |
| mailing to the server supplier (POP3/SMTP server). | |
NOTE 2 | : You should set the mail list when the alarm is triggered. | |
NOTE 3 | : When the alarm is triggered, you can find “ | ” message showed on the screen. |
| The AP will start recording automatically and you can get the email with the | |
| snapshot image in your mailbox. |
|