Digimerge D4202 user manual Video WEB Server Setting, Click Twice

Page 25

2.Network setting for PC. (The instruction is based on Win XP O/S . If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that on Win XP O/S.)

Click

twice

STEP 7: VIDEO WEB SERVER SETTING

1. To configure the Server IP, please click

twice to enter the setup.

2.Key in the User Name, Password, and IP address (The default setting for the User Name and Password are both “admin”; IP address is 192.168.1.10, Port : 80). Click OK to connect.

-22-

Image 25

Contents Digimerge Technologies Inc LP Video Router & TLR-DVR ControllerRisk of Electric SHOCK. do not Open Contents Read Instructions General PrecautionsIntroduction & Features Getting Started Reset Button at the bottom of the Video Web Server Alarm I/O optional for advanced applicationsLAN ACT & Link LED’s Actual & LinkConnection Structure Hardware Connection AT Server SiteSoftware Installation Static IP Setting Page Clicktwice IP SettingVideo WEB Server Settings System Config Static IP DVR Remote Setting4 CH DVR 9 / 16 CH DMRVideo Web Server PIN ConfigurationsConnecting to a PC VIA the Internet Software Installation Dynamic IP Setting What is a Dynamic IP Address ?System Reset Ddns Registration for a Dynamic IP AddressPage Connecting the PC to a Router / Router Login Click Twice Page Page Digimerge RJ-45 Power Video WEB Server Setting System Config Sensor Adsl modem WAN end Connecting ALL DevicesAPPENDIX#3 Software Operation AT the Remote SiteVideo Web Server control panel Digital device control panel Control Panel and Basic OperationPlay Playback OperationNetwork Advanced SettingsFTP File Path Toolbox Alarm Can I use Isdn to connect the Video Server? FAQ’SWhat kind of frame rate are we expecting? BNC SpecificationsWeb Server Appendix #1 DVR ControlSet the Remote function on the DVR Appendix #2 Sending E-MAIL Video Web ServerAppendix #3 Software Download Refefence Notes Limited Warranty Care and Maintenance Alden Road Markham Ontario L3R 4C1