Digimerge D4202 user manual Hardware Connection AT Server Site, Connection Structure

Page 8

HARDWARE CONNECTION AT SERVER SITE:

A . Connection Structure

NOTE: The RS-485 to control the DVR is optional.

1.Connect the video output of the camera or DVR to the video input of the Video Web Server.

2.Connect the PC to the Video Web Server for IP setting.

3.Connect the Video Server to the ADSL or CABLE MODEM with a Static IP address.

4.Connect PC with Internet and remote control Video Web Server.

B . Connection Application

-5-

Image 8

Contents LP Video Router & TLR-DVR Controller Digimerge Technologies IncRisk of Electric SHOCK. do not Open Contents General Precautions Read Instructions Introduction & Features Getting Started Alarm I/O optional for advanced applications Reset Button at the bottom of the Video Web ServerLAN ACT & Link LED’s Actual & LinkHardware Connection AT Server Site Connection StructureSoftware Installation Static IP Setting Page IP Setting ClicktwiceVideo WEB Server Settings System Config DVR Remote Setting Static IP4 CH DVR 9 / 16 CH DMRPIN Configurations Video Web ServerConnecting to a PC VIA the Internet What is a Dynamic IP Address ? Software Installation Dynamic IP SettingSystem Reset Ddns Registration for a Dynamic IP AddressPage Connecting the PC to a Router / Router Login Click Twice Page Page Digimerge RJ-45 Power Video WEB Server Setting System Config Sensor Connecting ALL Devices Adsl modem WAN endSoftware Operation AT the Remote Site APPENDIX#3Control Panel and Basic Operation Video Web Server control panel Digital device control panelPlayback Operation PlayAdvanced Settings NetworkFTP File Path Toolbox Alarm What kind of frame rate are we expecting? FAQ’SCan I use Isdn to connect the Video Server? Specifications BNCAppendix #1 DVR Control Web ServerSet the Remote function on the DVR Video Web Server Appendix #2 Sending E-MAILAppendix #3 Software Download Refefence Notes Limited Warranty Care and Maintenance Alden Road Markham Ontario L3R 4C1