CONTROL - REAR PANEL:
1 | 2 | 3 | 4 | 5 |
1.LAN
Connect the RJ45 standard pass through cable to the internet, or directly to a PC using the crossover cable
2.ACT & LINK LED’s (Actual & Link)
When these LED’s are blinking it indicates that the network is in operation
3.VIDEO INPUT (BNC, 2 channels)
Connect to a video source, such as a camera or DVR video output.
4.ALARM I/O (optional for advanced applications)
Connect control devices, such as a DVR, Motion Sensors, external alarm signal inputs, etc
5.POWER
Plug in the supplied power adaptor (12V ).
BOTTOM PANEL :
Bottom
3
RESET BUTTON (at the bottom of the Video Web Server)
Push this button for more than 5 seconds to reset the setting back to the default
setting.