Grizzly G0547 instruction manual Maintenance Safety, Schedule

SECTION 7: MAINTENANCE

Maintenance Safety

Your safety is important! Please follow the warnings below during this entire section:

!could occur if you con- nect your machine to theSerious personal injury

power source during the maintenance process. DO NOT connect the machine to the power source while performing any maintenance on this machine.

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

Projectiles from the machine could cause serious eye injury. Wear safety glasses at all times.

Schedule

Check for the following conditions before each use:

•Loose table bolts.

•Worn or damaged sanding discs or belts.

•Worn or damaged wires.

•Any other condition that could hamper the safe operation of this machine.

Perform the following tasks at the scheduled time intervals:

After Each Use

•Wipe off the sawdust build-up from the table surface.

•Turn off power switch and remove the switch key.

Weekly

•Wipe a lubricant such as SLIPIT® onto the table.

Long-Term Storage

•Keep unpainted surfaces rust free with products such as Boeshield® T-9.

-22- G0547 Combo Sander