Unpacking Piece Inventory | Grizzly G1014Z specs

Unpacking		Piece Inventory

The Model G1014Z Sander is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call our Customer Service number immediately for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.

Caution: The G1014Z is a heavy machine (120 lbs. shipping weight). DO NOT over-exert your- self while unpacking or moving your machine – get assistance. In the event that your Sander must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

After all the parts have been removed from the container, you should have:

1	Sanding Unit
1	Sanding Belt
1	Sanding Disc
1	Cast Iron Disc
1	Idler Roller
1	Back Stop
1	Miter Gauge
1	Work Table
1	Table Support Rod
4	Stand Legs
4	Upper Stand Braces
2	Lower Stand Braces
4	Rubber Feet
1	Quick Release Handle
1	Dust Port
1	Idler Roller Guard
1	Bolt Bag

Contents of the Bolt Bag

QTY.	DESCRIPTION	LOCATION
16	5⁄16''-18 x 1⁄2'' Carriage Bolts	Stand
16	5⁄16'' Flat Washers	Stand
16	5⁄16''-18 Hex Nuts	Stand
4	5⁄16''-18 x 1⁄2'' Hex Bolts	Stand/Base
4	5⁄16'' Flat Washers	Stand/Base
4	5⁄16''-18 x 1'' Hex Bolts	Stand /Feet
8	5⁄16'' Flat Washers	Stand /Feet
4	5⁄16''-18 Hex Nuts	Stand /Feet

In the event that any non-proprietary parts are missing (e.g. a nut or a washer...), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.




-6-	G1014Z Combination Sander