TROUBLESHOOTING
| Problem |
| Solution |
1. | No meter reading | A. | Check to see if the charger is plugged into the AC outlet. |
|
| B. | Make sure that the AC outlet is live, by plugging in a lamp. |
|
| C. | Check connections to the battery. |
2. | LEDs are not glowing | A. | Check to see if the charger is plugged into the AC outlet. |
|
| B. | Make sure that the AC outlet is live by plugging in a lamp. |
3. | Vehicle will not start in Engine Start | A. | Unplug the charger and check the connections at the battery. |
|
| B. | Wait the 4 minutes of rest time and try again. |
|
| C. | The thermal protector may have tripped and needs a little longer to close. |
|
|
| Wait and try again. |
|
| D. | On a severely discharged battery, charge for 10 to 15 minutes in the 12 |
|
|
| amp manual rate to help assist in cranking. |
4.Charger is connected correctly but charging is not taking place
A.The charger defaults to the 2 amp automatic condition when first charging. If your battery does not have 1 volt, you need to switch to the Manual mode for a few minutes until the charging begins and then switch back to Auto- matic mode in the desire charge rate.
6 |