Sanyo DE Cooling cycle, Heating cycle, Cooling Water outlet, 50%, Low Temperature Generator

ENVIRONMENTALLY FRIENDLY TECHNOLOGY

Cooling cycle

Figure 9. Cooling cycle

Exhaust Gas

Condenser Low Temperature Generator

Cooling Water outlet
Absorber
A Valve	High Temperature
Evaporator	Generator

Chilled Water

Burner

C

Valve

Refrigerant Pump			Purge Unit
				Heat Exchanger
	Absorbent Pump	Cooling Water Inlet
	Concentrated Solution			Liquid Refrigerant	Chilled Water
	Intermediate Solution			Refrigerant Vapor	Open
	Diluted Solution			Cooling Water	Close

Graph 10. D¨uhring diagram

	100											H	0%		40% 45%		50%		55%D	60%	65%	760
																				E
																						700
	90																				68%
																						500
	80														D'							400
																						300
(° C)	70										Concentrations											200
Temperature of refrigerant
	60																					160	Pressure (Torr)
										Constant
	50																					100
																						80
									of			F'
								Line
					I
	40									F			G									80
								C
																						40
	30																					30
	20																					20
	10																					10
																						8
		J			B
							A'
																						5
	0					A
	0	10	20	30	40	50	60	70		80	90		100	110	120	130		140	150	160	170
								Temperature of absorbent (° C)

SUPER ABSORPTION

Heating cycle

In the absorption heating cycle (Figure 10), the unit is essentially acting as a	heat transfer tubes removes the sensible heat of the condensed refrigerant
boiler. Diluted solution is heated in the high temperature generator releasing	and transfers the heat to the hot water loop. The condensed refrigerant is
refrigerant vapor from the absorbent.	mixed with the intermediate solution creating diluted solution. The diluted
The refrigerant vapor flows to the absorber/evaporator and condenses on	solution is pumped back to the high temperature generator where the cycle
the heat transfer tubes of the evaporator. The water through the evaporator	is started again.
Figure 10. Heating cycle

Condenser	Exhaust Gas
	Low Temperature Generator

Absorber
A Valve	High Temperature
Evaporator	Generator

Hot Water

Burner

C

Valve

Refrigerant Pump		Purge Unit
			Heat Exchanger
	Absorbent Pump
	Intermediate Solution		Liquid Refrigerant	Hot Water
				Open
	Diluted Solution		Refrigerant Vapor	Close

16 17