Power Tool USE and Care, Specific Safety Rules

GENERAL SAFETY RULES — FOR ALL POWER TOOLS

WARNING

READ ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in electric shock, ﬁre and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

POWER TOOL USE AND CARE

16.	Do not force the power tool. Use the
	correct power tool for your applica-
	tion. The correct power tool will do the
	job better and safer at the rate for which
	it was designed.
17.	Do not use the power tool if the switch
	does not turn it on and off.Any power tool
	that cannot be controlled with the switch is
	dangerous and must be repaired.
18.	Disconnect the plug from the power
	source and/or the battery pack from

SPECIFIC SAFETY RULES

1. Hold power tools by insulated grip-

ping surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a “live” wire will make ex-

posed metal parts of the tool “live” and

shock the operator.

2. Maintain labels and nameplates.

These carry important information.

If unreadable or missing, contact a

WORK AREA SAFETY

1.Keep work area clean and well lit. Cluttered or dark areas invite acci- dents.

2.Do not operate power tools in ex- plosive atmospheres, such as in the presence of ﬂammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while operating a power tool. Distrac- tions can cause you to lose control.

ELECTRICAL SAFETY

PERSONAL SAFETY

9.Stay alert, watch what you are do- ing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preven-

tive safety measures reduce the risk of

starting the tool accidentally.

19. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tools or

these instructions to operate power

tools. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool's operation. If damaged,

have the power tool repaired before

MILWAUKEE service facility for a free

replacement.

3. WARNING! Some dust created by

power sanding, sawing, grinding, drill-

ing, and other construction activities

contains chemicals known to cause

cancer, birth defects or other reproduc-

tive harm. Some examples of these

chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and

cement and other masonry products,

and

• arsenic and chromium from chemi-

cally-treated lumber.

Your risk from these exposures varies,

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling, or unplug- ging the power tool. Keep cord away from heat, oil, sharp edges, or mov- ing parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool out- doors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of elec- tric shock.

11.Avoid accidental starting. Ensure the switch is in the off-position before plug- ging in. Carrying tools with your ﬁnger on the switch or plugging in power tools that have the switch on invites accidents.

12.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotat- ing part of the power tool may result in personal injury.

13.Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.

15.If devices are provided for the connec- tion of dust extraction and collection facilities, ensure these are connected and properly used. Use of these de- vices can reduce dust-related hazards.

use. Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

22. Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

SERVICE

23.Have your power tool serviced by a qualiﬁed repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ven- tilated area, and work with approved safety equipment, such as those dust masks that are speciﬁcally designed to ﬁlter out microscopic particles.

6702-20, 6743-20, 6780-20, 6708-20, 6706-20 specifications

Milwaukee is a renowned brand in the power tools industry, recognized for its innovative designs and high-performance products. Among their extensive range, models such as the Milwaukee 6703-20, 6742-20, 6581-20, 6707-20, and 6792-20 stand out for their impressive features and cutting-edge technologies.

The Milwaukee 6703-20 is a heavy-duty, high-performance tool designed for drilling applications. With a powerful motor that delivers consistent torque, it is equipped with an all-metal gear case, ensuring durability and longevity. One of its standout features is the variable speed control, allowing users to adjust the speed for different materials and tasks. The ergonomic design and rubberized grip provide added comfort, making it suitable for extended use.

Next in line, the 6742-20 model showcases Milwaukee's commitment to innovation. This tool includes the REDLINK PLUS intelligence system, which offers advanced digital overload protection and enhances tool performance. Its compact design is perfect for tight spaces, while the high-output motor ensures efficient operation, regardless of the task complexity. The integrated LED light improves visibility in dark areas, enhancing user precision.

The Milwaukee 6581-20 is tailored for heavy-duty cutting applications. This model features a robust motor that can handle various materials, including wood and metal. It incorporates a quick-adjust feature that allows for quick and accurate depth adjustments. The tool’s design includes a built-in rafter hook for convenient storage, along with a durable construction that withstands rigorous job site conditions.

With the 6707-20 model, Milwaukee introduces a tool engineered for user efficiency and convenience. It comes with a powerful battery that supports extended run time, coupled with the REDLITHIUM technology, which enhances overall performance. The tool includes multiple speed settings and a keyless chuck for quick bit changes. This model is designed for versatility, making it an excellent choice for both professional contractors and DIY enthusiasts.

Finally, the Milwaukee 6792-20 is celebrated for its enhanced safety features and user-friendly operation. This tool integrates advanced safety technologies, including overload protection and electronic braking for improved user control. The lightweight design paired with an ergonomic handle ensures ease of use throughout prolonged tasks.

Incorporating a blend of high-performance capabilities, innovative technologies, and user-centric designs, Milwaukee’s 6703-20, 6742-20, 6581-20, 6707-20, and 6792-20 models exemplify the brand's dedication to providing exceptional products that meet the diverse needs of professionals in the power tools market. These tools represent the future of efficiency, reliability, and performance in the industry.