Chicago Pneumatic SD25 Mapping Screwdriver Functions, Disabling the Push-to-Start Function

User’s Manual

Mapping Screwdriver Functions

This section describes how VS is used to map screwdriver functions to the buttons and switches on the screwdriver. You can also use VS to change the default mapping. To do this, refer to the Visual Supervisor User s Guide (part number 39-30-34823).

Disabling the Push-to-Start Function

Typically, to start a fastening cycle when the push-to-start function on a handheld screwdriver is disabled:

•Press the throttle/trigger lever to start the fastening cycle.

•Release the throttle/trigger lever to stop the fastening cycle.

December 2005 Page 15