Sanyo KHS3682, KHS3082 instruction manual Air Clean Filter, How to install the air clean filter

Page 16
2. Lift the anti-mold filter up slightly to disengage it from the protrusions on the unit.
3. Pull downward to remove the filter from the unit.
Cleaning
Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.
How to replace the anti-mold filter
1. Insert the top of the anti-mold filter, and then secure the bottom of the filter with the protrusions on the unit.
2. Close the front panel by pushing the center of the front panel and then pressing both edges until the panel clicks into place.
Anti-mold filter
Protrusions
Anti-Mold Filter
The anti-mold filter behind the front panel should be checked and cleaned at least once every two weeks.
How to remove the anti-mold filter
1. Grasp both ends of the front panel and pull forward and up to open the front panel.
Front panel
CAUTION
1. Never use solvents, or harsh chemicals when cleaning the indoor unit. Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if handled improperly; be especially careful when you clean these parts.
3. The internal coil and other components of the outdoor unit must be cleaned every year. Consult your dealer or service center.
01_KHS3682_EN.fm Page 16 Friday, February 12, 2010 12:42 PM
If these parts are stained, use a clean cloth moistened with a mild liquid detergent. When cleaning the grille, be careful not to force the vanes out of place.

2 1 2

Air Clean Filter

The air clean filter removes dust and dirt from the air, and reduces odors and smoke from tobacco.

16

This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room. You must open doors or windows frequently when you use gas or oil heating appliances. Otherwise there is a risk of suffocation in extreme cases.

How to install the air clean filter

The air clean filter needs to be installed behind the anti-mold filter.

Anti-mold filter

Air clean filter

Air filter holder

1.Open the front panel and remove the anti-mold filter.

2.Remove the air filter holder from the anti-mold filter.

3.Install the air clean filter in the air filter holder.

4.Install the air filter holder to the anti-mold filter, remount the anti- mold filter, and close the front panel.

How to clean the air clean filter

In general, the filter should be sucked to remove dust in low fan speed of a vacuum cleaner once every three months.

If there is heavily grime on the filter, soak the filter in lukewarm water with neutral detergent diluted 1:500 for 1 to 2 minutes then wash it.

Rinse the filter in clean water, then let it dry on the towel in room temperature.

NOTE

Do not bend nor give excessive force onto the air clean filter.

If the filter surface is heavily blocked with dirt or damaged, replace it with new one. Purchase a replacement filter at your local dealer. (model STK-FDXB)

Cleaning the main unit and remote control unit

Wipe clean using a soft, dry cloth.

To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F, wring thoroughly, and then wipe.

The front panel can be removed in order to wash it with water.

Removing and remounting the front panel

Removing

Open the front panel until it is nearly horizontal, grasp the sections near the front panel arms on both sides, and then remove the panel by pushing the arms towards the outside while pulling the panel towards you.

If the front panel is difficult to remove, grasp both ends of it and lift it up slightly.

Move it to the left and disengage the left arm, then move it to the right and disengage the right arm.

Front panel

Arm

OI-149-16-EG

Image 16
Contents Mode D’EMPLOI KHS3082 KHS3682Features ContentsAlert Symbols Installation LocationSafety Instructions Product InformationNames of Parts Unit Display and Operation ButtonRemote Control Unit Display SymbolsRemote Control Unit HR. Timer button 1-HOUR OFF Timer Temperature setting buttons TempMode selector button High Power buttonUsing the Remote Control Unit Air conditioner Indoor unit Receiver Remote control unitACL button 16 mmOperation with the Remote Control Unit Automatic OperationManual Operation StepAdjusting the Fan Speed Night Setback ModeQuiet Mode Fan OnlyHigh Power Mode LED Clean ModeUnoccupied Mode Unoccupied Indication StatusSpecial Remarks Setting the Timer How to set the present timeHow to set the OFF time How to set the on timeUsing the 1-HOUR OFF Timer How to set daily ON/OFF repeat timerHour OFF Timer Operation together with the daily ON/OFF repeat timerAdjusting the Airflow Direction Operation Without the Remote Control UnitCare and Cleaning HorizontalAir Clean Filter How to install the air clean filterHow to clean the air clean filter Cleaning the main unit and remote control unitTroubleshooting Wired Remote ControllerOperating Range Washing the front panel with waterCaractéristiques Table DES MatièresSymboles ’AVERTISSEMENT Emplacement D’INSTALLATIONInformations SUR LE Produit Conseils DE SécuritéNOM DES Pièces Télécommande Affichage SymbolesTélécommande Bouton de temporisateur 1 heure 1 HR. Timer Sélecteur de mode ModeBouton de haute puissance High Power CapteurUtilisation DE LA Télécommande Climatiseur élément intérieur Récepteur TélécommandeBouton ACL 32 x 5/8 4 x 16 mmFonctionnement Avec Télécommande Fonctionnement automatiqueFonctionnement manuel ÉtapeMode économie nocturne Mode de silencieux QuietRéglage de la vitesse du ventilateur Vitesse manuelle du ventilateurMode de fonctionnement à haute puissance Mode de voyant de nettoyage LED CleanMode Pièce inoccupée Unoccupied Indication de pièce inoccupéeRemarques Spéciales Réglage DU Temporisateur Réglage à l’heure actuelleRéglage du moment de mise à l’arrêt Réglage du moment de mise en marcheTemporisateur 1 heure 1 Hour OFF Timer Emploi DU Temporisateur 1 HeureConseils Pour Économiser L’ÉNERGIE Choses à ne pas faireFonctionnement Sans Télécommande Réglage DU Flux D’AIREntretien ET Nettoyage HorizontalementInstallation du filtre de nettoyage d’air Remplacement du filtre anti-moisissureNettoyage de l’appareil principale et de la télécommande Filtre anti-moisissureTélécommande Filaire Guide DE DépannagePlage DE Températures DE Fonctionnement Nettoyage du panneau avant à l’eauIshida Make up USレター 白ページ Ishida Make up USレター 白ページ Sanyo Ave., San Diego

KHS3082, KHS3682 specifications

Sanyo holds a significant position in the realm of home appliances, particularly with its innovative and efficient refrigerator models such as the KHS3682 and KHS3082. These two models stand out for their combination of advanced technology and user-friendly features, making them ideal choices for modern households.

The Sanyo KHS3682 is a top-of-the-line refrigerator characterized by its spacious interior and cutting-edge design. This model features a remarkable cooling system that employs direct cooling technology, ensuring uniform temperature distribution throughout the fridge. With a total capacity of approximately 368 liters, it provides ample space for storing fresh produce, beverages, and frozen goods, making it perfect for families and individuals alike.

One of the key features of the KHS3682 is its energy efficiency. It is equipped with an inverter compressor that adjusts its speed based on the cooling demand. This technology not only helps to reduce electricity consumption but also minimizes noise levels, providing a quieter environment. Furthermore, the model is designed with a frost-free interior, eliminating the need for manual defrosting and ensuring that food stays fresh for extended periods.

On the other hand, the Sanyo KHS3082 offers similar qualities but caters to slightly smaller needs, with a capacity of around 308 liters. This model also boasts an advanced cooling system enhanced by the direct cooling technology. An affordable alternative, the KHS3082 is designed to suit those who may not require a larger refrigerator but still desire efficiency and quality.

Both models feature adjustable shelving, allowing users to customize their storage according to their preferences and requirements. The bright LED lighting adds visibility throughout the fridge, making it easy to locate items. Additionally, the humidity-controlled crisper drawers are designed to keep fruits and vegetables fresher for longer periods, reducing food waste.

In terms of design, both the KHS3682 and KHS3082 come with sleek exteriors available in various finishes, making them suitable for any kitchen décor. Their designs incorporate ergonomic handles and easy-to-clean surfaces, enhancing user convenience.

In summary, the Sanyo KHS3682 and KHS3082 refrigerators deliver on technology, efficiency, and design. With features like inverter compressors, adjustable shelving, and frost-free interiors, these models are robust solutions for anyone seeking reliable refrigeration in modern living spaces.