Remote Control Unit

01_KHS3682_EN.fm Page 6 Friday, February 12, 2010 12:42 PM

Transmitter

When you press the buttons on the remote control unit, the mark appears in the display to transmit the setting changes to the receiver in the air conditioner.

Display

Information on the operating conditions is displayed while the remote control unit is switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are not displayed.

LED CLEAN button

: If this button is pressed during AUTO, HEAT, DRY, COOL or FAN operation, the UV anti-bacterial unit is activated for 30 minutes and cleans the air blown from the air conditioner.

QUIET button

: When you press this button, the fan rotates slower than the fan speed setting to provide a quieter operating sound.

FAN SPEED selector button

: The air conditioner automatically decides the fan speeds.

: High fan speed

: Medium fan speed : Low fan speed

FLAP button

Press this button either to select the setting of the airflow direction to the auto. flap in each mode or one of the six possible positions manually or to select the sweep function which moves the flap up and down automatically. : Auto flap setting: If selected in a heating operation, the flap is set to position (3) in the following chart. If selected in a cooling or dry

operation, the flap is set at position (7) in the following chart. : The airflow direction can be set manually. (six positions)

: The flap moves up and down automatically.

NOTE

When you press the FLAP button, the air flow direction will be changed one by one as follows.

SWEEP

ON TIME/OFF TIME setting buttons

Advance button

Return button

No display: The timer does not operate.

: The air conditioner starts at the set time.

: The air conditioner stops at the set time.

: The air conditioner stops and starts, or starts and stops, at the set times every day. For details, see “SETTING THE TIMER”.

CANCEL button

SENSOR button

When you press this button (use a small-tipped object such as a ballpoint pen), the mark will appear at the display. And the room temperature is detected by the

sensor which is built into the indoor unit and the air conditioner is controlled accordingly.

NOTE

If the remote control unit is located near a heat source, such as a space heater or in direct sunlight, press the SENSOR button to switch to the sensor on the indoor unit.

ADDRESS switch		Temperature display selector button

•The address switch changes to prevent mixing of signals from remote control units when two air conditioners are installed next to each other. Normally, the address switch is set to A. For more information, please contact the dealer where you made the purchase.

•Normally, the tabs on the remote control unit should not be bent.

This switches the temperature display between °C and °F.

6	OI-149-6-EG

KHS3082, KHS3682 specifications

Sanyo holds a significant position in the realm of home appliances, particularly with its innovative and efficient refrigerator models such as the KHS3682 and KHS3082. These two models stand out for their combination of advanced technology and user-friendly features, making them ideal choices for modern households.

The Sanyo KHS3682 is a top-of-the-line refrigerator characterized by its spacious interior and cutting-edge design. This model features a remarkable cooling system that employs direct cooling technology, ensuring uniform temperature distribution throughout the fridge. With a total capacity of approximately 368 liters, it provides ample space for storing fresh produce, beverages, and frozen goods, making it perfect for families and individuals alike.

One of the key features of the KHS3682 is its energy efficiency. It is equipped with an inverter compressor that adjusts its speed based on the cooling demand. This technology not only helps to reduce electricity consumption but also minimizes noise levels, providing a quieter environment. Furthermore, the model is designed with a frost-free interior, eliminating the need for manual defrosting and ensuring that food stays fresh for extended periods.

On the other hand, the Sanyo KHS3082 offers similar qualities but caters to slightly smaller needs, with a capacity of around 308 liters. This model also boasts an advanced cooling system enhanced by the direct cooling technology. An affordable alternative, the KHS3082 is designed to suit those who may not require a larger refrigerator but still desire efficiency and quality.

Both models feature adjustable shelving, allowing users to customize their storage according to their preferences and requirements. The bright LED lighting adds visibility throughout the fridge, making it easy to locate items. Additionally, the humidity-controlled crisper drawers are designed to keep fruits and vegetables fresher for longer periods, reducing food waste.

In terms of design, both the KHS3682 and KHS3082 come with sleek exteriors available in various finishes, making them suitable for any kitchen décor. Their designs incorporate ergonomic handles and easy-to-clean surfaces, enhancing user convenience.

In summary, the Sanyo KHS3682 and KHS3082 refrigerators deliver on technology, efficiency, and design. With features like inverter compressors, adjustable shelving, and frost-free interiors, these models are robust solutions for anyone seeking reliable refrigeration in modern living spaces.