Sanyo KHS2472, KHS1872 Special Remarks, ‘‘DRY’’ Operation, Heating Operation, Clicking Sound

Page 17

Special Remarks

‘‘DRY’’ ( ) Operation

How it works? • Once the room temperature reaches the level that was set, the unit’s operation frequency is changed automatically.

• During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze.

• ‘‘DRY’’ operation is not possible if the indoor temperature is 59 °F or less.

Heating ( ) Operation

Heating performance

• Because this air conditioner heats a room by drawing in the heat of the

 

outside air (heat pump system), the heating efficiency will fall off when the

 

outdoor temperature is very low. If sufficient heat cannot be obtained with this

 

air conditioner, use another heating appliance together with it.

Defrosting

• When the outdoor temperature is low, frost or ice may form on the heat

 

exchanger coil, reducing heating performance. When this happens, a

 

microcomputer defrosting system operates. At the same time, the fan on the

 

indoor unit stops and the OPERATION lamp lights up red and orange

 

alternately until defrosting is completed. Heating operation restarts after

 

several minutes. (This interval will vary slightly depending upon the outdoor

 

temperature and the way in which frost forms.)

Cold draft prevention

• For several minutes after the start of heating operation, the indoor fan runs at

 

lower speed until the indoor heat exchanger coil has warmed up sufficiently.

 

However, the fan may remain stopped when the room temperature is low. This

 

is because the COLD DRAFT PREVENTION SYSTEM is operating.

Power failure during operation

Clicking Sound

In the event of power failure, the unit will stop. When the power is resumed, the unit will restart automatically within five minutes by the remote control unit.

Clicking sound is heard from the air conditioner

Remote Control Unit

In heating or cooling operation, any plastic parts may expand or shrink due to a sudden temperature change. In this event, a clicking sound may occur. This is normal, and the sound will soon disappear.

The remote control unit sends the setting condition to the air conditioner regularly at five minute intervals.

OI-801-17EG

17

 

Image 17
Contents This air conditioner uses the new refrigerant R410A Mode D’EMPLOIFeatures Product Information ContentsAlert Symbols Electrical Requirements Installation LocationSafety Instructions Outdoor Unit Names of PartsIndoor Unit Quiet lamp Unit Display and Operation ButtonRemote Control Unit Display On Time Remote Control UnitHour OFF Timer Heat AutoDRY CoolTemperature Display Selector Using the Remote Control UnitHow to Install Batteries Button Time Display Selector buttonUsing the Remote Control Unit Automatic Operation Operation with the Remote Control UnitStep Press the ON/OFF operation buttonManual Operation Operation with the Remote Control UnitFan Only Adjusting the Fan SpeedNight Setback Mode is used for saving energy Night Setback ModeCooling and DRY Mode ION Mode Quiet ModeHigh Power Mode Special Remarks Remote Control Unit‘‘DRY’’ Operation Heating OperationOperation Indication Setting the TimerHow to set the present time Repeat timer Setting the TimerTo cancel a timer program Press the Cancel button 1030 pm 710 am 1100 am Present timeSetting procedure Using the 1-Hour OFF TimerCancellation procedure Operation together with the Daily ON/OFF Repeat TimerCool Sweep DRY FAN Heat Adjusting the Airflow DirectionWhen the air conditioner is not running Operation without the Remote Control UnitCare and Cleaning Cleaning Care and CleaningNegative ion generator metal electrodes inside plastic case Trouble Possible Cause Remedy TroubleshootingOperating Range Caractéristiques Informations sur le produit Symboles d’avertissementTable des matières Conseils de sécurité Emplacement d’installationInstructions relatives à l’alimentation Élément Intérieur Nom des piècesÉlément Extérieur RemarqueTimer Quiet TimerAfficheur de l’appareil et bouton de fonctionnement OperationTélécommande Affichage Télécommande On TIME/OFF Time Télécommande suiteUtilisation de la télécommande Climatiseur élément intérieur Récepteur Télécommande Utilisation de la télécommande suitePour retirer la télécommande, tirer vers l’avant TrouÉtape Fonctionnement avec télécommandeFonctionnement automatique Étape Remarque Fonctionnement avec télécommande suiteFonctionnement manuel Ventilateur uniquement Réglage de la vitesse du ventilateurVitesse automatique Du ventilateurCe mode permet de réduire la consommation d’énergie Mode économie nocturneMode d’ionisation ION Mode de silencieux QuietMode de fonctionnement Haute puissance Remarques spéciales TélécommandeFonctionnement séchage ChauffageRéglage à l’heure Réglage du temporisateurActuelle Réglage du moment de mise à l’arrêt OFFRéglage du moment de mise en marche on Réglage du temporisateur suite1030 p.m 710 a.m 1100 a.m ProgrammationEmploi du temporisateur 1 heure HR. TimerConseils pour économiser l’énergie Daily ON/OFF RepeatSweep Cool DRY FAN Heat Réglage du flux d’airEntretien et nettoyage Fonctionnement sans télécommandeElément Intérieur Si le climatiseur ne fonctionne pasFront Entretien et nettoyage suiteNettoyage du générateur d’ions négatifs Panne Cause possible Remède Guide de dépannagePlage de températures de fonctionnement Sanyo Fisher Company

KHS1872, KHS2472 specifications

The Sanyo KHS2472 and KHS1872 are two robust and efficient refrigeration solutions designed by Sanyo, a company reputed for its innovation in the appliances sector. Each model features advanced technology geared towards maximizing performance while providing energy efficiency, making them suitable for both commercial and residential use.

Starting with the Sanyo KHS2472, this model boasts a large capacity, making it perfect for businesses that require significant storage for perishable goods. The refrigeration system utilizes high-performance compressors that ensure rapid cooling and consistent temperature regulation. One of its standout features is the energy-efficient design, which contributes to lower electricity costs without compromising on effectiveness. The KHS2472 is equipped with multiple shelving options that enhance accessibility and organization, allowing users to store a variety of items without hassle.

In terms of technology, the KHS2472 integrates advanced temperature control mechanisms, including digital displays, that offer precise monitoring and adjustments. This ensures that the contents inside are stored at the optimal temperature while minimizing fluctuations. Furthermore, the model utilizes an eco-friendly refrigerant, aligning with Sanyo's commitment to sustainability and environmental responsibility.

On the other hand, the Sanyo KHS1872 is designed for those who require a slightly smaller capacity but still demand top-tier features and performance. This model is perfect for smaller establishments or as an additional refrigeration unit for larger operations. Similar to the KHS2472, the KHS1872 prioritizes energy efficiency, employing cutting-edge insulation technology that helps maintain temperature while reducing energy consumption.

The KHS1872 also comes equipped with user-friendly controls, allowing for easy temperature adjustments and monitoring. This model includes adjustable shelving as well, enabling efficient storage solutions tailored to various needs. Moreover, it features enhanced airflow systems that ensure uniform cooling throughout the storage area, preventing hot spots and ensuring optimal storage conditions.

Both models also include ergonomic designs with user-friendly access points, built with durability in mind to withstand the rigors of daily use. Easy maintenance features such as removable door seals and accessible interior components make routine cleaning simple. Overall, the Sanyo KHS2472 and KHS1872 exemplify quality engineering, catering to a diverse range of refrigeration requirements without sacrificing efficiency or performance.