Sanyo KHS2472, KHS1872 instruction manual Adjusting the Airflow Direction, Cool Sweep DRY FAN Heat

Page 21

Adjusting the Airflow Direction

1. Horizontal

CAUTION

The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right.

When the humidity is high, the vertical vanes should be in the front position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way to the right or left, condensation may begin to form around the air vent and drip down.

2.Vertical The vertical airflow can be adjusted by moving the flap with the remote control unit. Do not move the flap with your hands. Confirm that the remote control unit has been turned on. Use the FLAP button to set either the sweep function or one of the six airflow direction settings.

A. Sweep function

The flap starts moving up and down to deliver air over the sweep range.

C. Auto flap function

The flap is set to the recommended position.

COOL

SWEEP

DRY

FAN

SWEEP

HEAT

B. Setting the airflow manually

Referring to the above illustration, use the FLAP button to set the airflow direction within the range used during the heating, cooling, or dehumidifying operation.

NOTE

CAUTION

•The flap automatically closes when the unit is off.

•During the heating operation, the fan speed will be very low and the flap will be in the horizontal position (position ) until the air being blown out of the unit begins to warm. Once the air warms up, the flap position and fan speed change to the settings specified with the remote control.

•Use the FLAP button on the remote control to adjust the position of the flap. If you move the flap by hand, the flap position according to the remote control and the actual flap position may no longer match. If this should happen, shut off the unit, wait for the flap to close, and then turn on the unit again; the flap position will now be normal again.

•Do not have the flap pointed down during cooling operation. Condensation may begin to form around the air vent and drip down.

OI-801-21EG

21

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents This air conditioner uses the new refrigerant R410A Mode D’EMPLOIFeatures Contents Alert SymbolsProduct Information Installation Location Safety InstructionsElectrical Requirements Names of Parts Indoor UnitOutdoor Unit Quiet lamp Unit Display and Operation ButtonRemote Control Unit Display Remote Control Unit Hour OFF TimerOn Time Heat AutoDRY CoolTemperature Display Selector Using the Remote Control UnitHow to Install Batteries Button Time Display Selector buttonUsing the Remote Control Unit Automatic Operation Operation with the Remote Control UnitStep Press the ON/OFF operation buttonManual Operation Operation with the Remote Control UnitFan Only Adjusting the Fan SpeedNight Setback Mode Cooling and DRY ModeNight Setback Mode is used for saving energy Quiet Mode High Power ModeION Mode Special Remarks Remote Control Unit‘‘DRY’’ Operation Heating OperationSetting the Timer How to set the present timeOperation Indication Repeat timer Setting the TimerTo cancel a timer program Press the Cancel button 1030 pm 710 am 1100 am Present timeSetting procedure Using the 1-Hour OFF TimerCancellation procedure Operation together with the Daily ON/OFF Repeat TimerCool Sweep DRY FAN Heat Adjusting the Airflow DirectionOperation without the Remote Control Unit Care and CleaningWhen the air conditioner is not running Cleaning Care and CleaningNegative ion generator metal electrodes inside plastic case Troubleshooting Operating RangeTrouble Possible Cause Remedy Caractéristiques Symboles d’avertissement Table des matièresInformations sur le produit Emplacement d’installation Instructions relatives à l’alimentationConseils de sécurité Élément Intérieur Nom des piècesÉlément Extérieur RemarqueTimer Quiet TimerAfficheur de l’appareil et bouton de fonctionnement OperationTélécommande Affichage Télécommande On TIME/OFF Time Télécommande suiteUtilisation de la télécommande Climatiseur élément intérieur Récepteur Télécommande Utilisation de la télécommande suitePour retirer la télécommande, tirer vers l’avant TrouFonctionnement avec télécommande Fonctionnement automatiqueÉtape Fonctionnement avec télécommande suite Fonctionnement manuelÉtape Remarque Ventilateur uniquement Réglage de la vitesse du ventilateurVitesse automatique Du ventilateurCe mode permet de réduire la consommation d’énergie Mode économie nocturneMode de silencieux Quiet Mode de fonctionnement Haute puissanceMode d’ionisation ION Remarques spéciales TélécommandeFonctionnement séchage ChauffageRéglage à l’heure Réglage du temporisateurActuelle Réglage du moment de mise à l’arrêt OFFRéglage du moment de mise en marche on Réglage du temporisateur suite1030 p.m 710 a.m 1100 a.m ProgrammationEmploi du temporisateur 1 heure HR. TimerConseils pour économiser l’énergie Daily ON/OFF RepeatSweep Cool DRY FAN Heat Réglage du flux d’airEntretien et nettoyage Fonctionnement sans télécommandeElément Intérieur Si le climatiseur ne fonctionne pasFront Entretien et nettoyage suiteNettoyage du générateur d’ions négatifs Guide de dépannage Plage de températures de fonctionnementPanne Cause possible Remède Sanyo Fisher Company

KHS1872, KHS2472 specifications

The Sanyo KHS2472 and KHS1872 are two robust and efficient refrigeration solutions designed by Sanyo, a company reputed for its innovation in the appliances sector. Each model features advanced technology geared towards maximizing performance while providing energy efficiency, making them suitable for both commercial and residential use.

Starting with the Sanyo KHS2472, this model boasts a large capacity, making it perfect for businesses that require significant storage for perishable goods. The refrigeration system utilizes high-performance compressors that ensure rapid cooling and consistent temperature regulation. One of its standout features is the energy-efficient design, which contributes to lower electricity costs without compromising on effectiveness. The KHS2472 is equipped with multiple shelving options that enhance accessibility and organization, allowing users to store a variety of items without hassle.

In terms of technology, the KHS2472 integrates advanced temperature control mechanisms, including digital displays, that offer precise monitoring and adjustments. This ensures that the contents inside are stored at the optimal temperature while minimizing fluctuations. Furthermore, the model utilizes an eco-friendly refrigerant, aligning with Sanyo's commitment to sustainability and environmental responsibility.

On the other hand, the Sanyo KHS1872 is designed for those who require a slightly smaller capacity but still demand top-tier features and performance. This model is perfect for smaller establishments or as an additional refrigeration unit for larger operations. Similar to the KHS2472, the KHS1872 prioritizes energy efficiency, employing cutting-edge insulation technology that helps maintain temperature while reducing energy consumption.

The KHS1872 also comes equipped with user-friendly controls, allowing for easy temperature adjustments and monitoring. This model includes adjustable shelving as well, enabling efficient storage solutions tailored to various needs. Moreover, it features enhanced airflow systems that ensure uniform cooling throughout the storage area, preventing hot spots and ensuring optimal storage conditions.

Both models also include ergonomic designs with user-friendly access points, built with durability in mind to withstand the rigors of daily use. Easy maintenance features such as removable door seals and accessible interior components make routine cleaning simple. Overall, the Sanyo KHS2472 and KHS1872 exemplify quality engineering, catering to a diverse range of refrigeration requirements without sacrificing efficiency or performance.
Top Page Image Contents