Makita BHS630 dimensions Lock Off Lever, Switch Lever

Page 12

P 12/ 16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-8. Lock Off Lever, Switch Lever

ASSEMBLING

Assemble Switch lever and Lock off lever to Handle as illustrated in Fig. 16.

Fig. 16

1.Compression spring 4 has to be assembled deeply and firmly to Switch lever and Lock off lever as drawn below.

Compression spring 4

2.Set Lock off lever Compression spring 4 and Switch lever to the Handle at the position drawn below.

Handle

Lock off lever

Switch lever

Switch lever

Lock off lever

Note in Assembling:

Both Compression springs are interchangeable.

Compression spring 4

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Specification Optional accessoriesStandard equipment Necessary Repairing Tools RepairDISASSEMBLY/ASSEMBLY BaseLock Lever Depth Guide Flat Washer 6 M6x85 Hex bolt Angular Guide LED and Motor SectionNotch a Blade Case Complete DISASSEMBLY/ASSEMBLY Bearing Box Gear Section Lock Off Lever, Switch Lever Adjusting Accuracy of 90 degree cut Adjusting Accuracy of Parallel of Base to Saw bladeCircuit diagram Fig. D-1Wiring diagram Wiring of Brush holder’s Lead wiresWiring in Handle Wiring of LED Lead wires Blade case and Connector box Connector box
Top Page Image Contents