Disassembly/Assembly, Base | Makita BHS630 specs

P 3/ 16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-1. Base

DISASSEMBLING

Base can be separated from the machine as drawn in Figs. 2 and 3.

Fig. 2

1.Remove M6x20 Thumb screw, Spring washer 6, and Flat washer 6 from Angular guide side and Depth guide side.

2.Remove M6x6 Hex Socket Head Set Screw from Angular guide side and Depth guide side.

3.Remove Shoulder pin 6-7.

Now Base complete is separated from the machine.

		M6x6 Hex socket head set Screw
	M6x20 Thumb	M6x20 Thumb
	screw	M6x20 Thumb
	screw	screw
		screw

Base

Spring	Flat
washer 6	washer 6

	Spring
Flat	washer 6

washer 6		Shoulder pin 6-7

Fig. 3

Remove the parts drawn below from Base. And then, replace the Base with the new one.

Do not forget to remove M6x8 Hex socket head set screw for adjusting the angle of saw blade from the reverse side of Base.

M4x8 Pan head screw	Top guide	M6x8 Hex socket head
	Top guide	set screw
Lock lever	Lock lever
Lock lever
Torsion spring 11
Base		Torsion
		spring 11

ASSEMBLING

Take the reverse step of Disassembling. Refer to Fig. 3, Fig. 2.

Note in Assembling

1.After mounting Lock lever, its adjustment is required to obtain the correct lock position for guide rule, mounted. to Base. See “[3]-2. Lock Lever” .

2.After mounting Base to the machine, adjustment of angle of saw blade to the Base is required. See “[4] Adjustment”