Makita BHS630 dimensions Depth Guide

P 5/ 16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-3. Depth Guide

DISASSEMBLING

Depth guide is joined to the Machine at the Handle section, and to Base at Rear angular guide.

Separate Depth guide by disassembling from Handle section and from Rear angular guide as drawn in Fig. 5.

Fig. 5

1.Loosen Lever 55 by turning toward the direction designated with arrow.

2.Take off Stop ring E-8, and remove M6x85 Hex bolt, by employing Lever 55 as a wrench. And remove Flat washer 6. Now, Depth guide is disjoined from the machine.

Lever 55 Flat washer 6

M6x85

Hex bolt

Base

Lever 55

3. Remove Pipe 6.

Pipe 6

5.Remove M4x20 Hex socket head bolt and M4-7 Hex lock nut, pulling down Base to the position in which they can be easily removed. Now, Depth guide is disjoined both from the machine

and Rear angular guide.

M4x20 Hex socket

Rear angular head bolt guide

M4-7 Hex lock nut

Stop ring E-8

Pipe 6

4.Remove M6 Hex nut, loosening M5x8 Hex socket head set screw.

M6 Hex nut

M5x8 Hex socket head

set screw ( No need to remove completely.)

6.Disassemble Depth guide, and remove two Collars from the both side of Depth guide.

Depth guide

Collar