Flat Washer 6 M6x85 Hex bolt

P 6/ 16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-3. Depth Guide

ASSEMBLING

1.Assemble Depth guide to Rear angular guide by tightening with M4x20 Hex socket head bolt and M4-7 Hex lock nut. Refer to the bottom left illustration in Fig. 5.

2.Set Collar to the both side of the Depth guide. Refer to the bottom right illustration in Fig. 5.

3.Mount M6 Hex nut to Blade case as illustrated in Fig. 6.

Fig. 6

1.Mount M6 Hex nut, facing its concave side to M5x8 Hex socket head set screw side. So, the Hex nut can be fixed with M5x8 Hex socket head screw firmly in Blade case.

	M6 Hex nut	M5x8 Hex socket head set screw
	M6 Hex nut	M6 Hex nut
		M6 Hex nut

This concave portion accepts the end of M5x8 Hex socket head set screw.

4.Proceed the assembling as drawn in Fig. 7.

Fig. 7

1.Insert Pipe 6 into the hole of Motor housing complete

at the Handle portion.

Pipe 6

2.Passing M6x85 Hex bolt through Flat washer 6, insert the Hex bolt into the Pipe 6, and pass through two Collars and Depth guide.

Pipe 6

3.Setting the machine to the deepest position (max. cut mode), drive the M6x85 Hex bolt to the M6 Hex nut, mentioned in Fig. 6

4. The distance between the bottom of Base and the bend of Lever 55 has to be approx 45 mm, when the machine is adjusted to obtain max. cutting depth.

45 mm