P 4/ 11
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-2. Reciprocating Mechanism
DISASSEMBLING
(1)Separate Housing R from Housing L (Fig. 2).
(2)Now, Reciprocating mechanism can be disassembled (Fig. 4).
Fig. 4
1. Remove Leaf spring.
Leaf spring 
2.Turn DC motor shaft to move Collared sleeve 4 up to the top position of Slider’s elliptical hole.
Slider |
|
Collared |
|
sleeve 4 | Housing L |
3.A space for removing Slider from Collared sleeve 4 is secured.
Collared sleeve 4
4. Remove Slider section from the | 5 . Remove Collared sleeve 4. |
Collared sleeve 4. |
Slider section
Slider
Collared sleeve 4
Collared sleeve 4
6 . Remove Retaining ring
Retaining ring
Note;
Retaining ring
7.Now, remove Gear complete and Pin 3.
Pin 3
Gear complete
8. Remove Balance plate and Push plate |
| 9. Remove DC motor from Bearing |
from Bearing case complete. |
| case complete with 1R269. |
Bearing case
complete Balance plate
Push plate 
Dust seal 
Bearing case |
|
complete | DC motor |
|