P 6/ 11
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Reciprocating Mechanism (cont.)
ASSEMBLING
(4)After setting DC motor and Reciprocating mechanism to Housing L, assemble Slider section and Leaf spring (Fig. 7).
Fig. 7
5. Make sure to insert O ring 5 into the bottom of | 6. Turn DC motor shaft to move Collared sleeve 4 to | |
assembling holes for Slider guide. | the top position so as to reserve the space for | |
| assembling Slider section. | |
O Ring 5 | ||
|
Housing L
Housing R
Assembling holes
7.Assemble Slider with Seal plate, Slider support and Slider guide to Housing L while inserting the elliptical hole of Slider into Collard sleeve 4.
8.Facing the flat side of Leaf spring to the front, insert it into the assembly hole discribed below vertically.
Holder
Collared |
| |
sleeve 4 |
| |
Seal plate | Slider | |
Slider support | ||
| ||
Elliptical hole | Slider guide |
Retainer complete
9.Make sure to put Holder and Retainer complete in Housing L before mounting Housing R.