Makita VJ01, JV100D dimensions Lever

P 7/ 11

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-2. Reciprocating Mechanism

ASSEMBLING

(5)Assemble Housing R (Fig. 8).

Fig. 8

10.Mount Change lever to the Switch while inserting the protrusion of Switch into the hole of Change lever.

Housing R

11.Assemble Housing R while inserting Change lever into the assembling hole.

Change lever

Change lever

[3] -3. Lever 19

DISASSEMBLING

(1) After separating Housing R, remove DC motor and Reciprocating mechanism from Housing L.

So, the stem of Lever 19 comes into your sight. Now, Lever 19 can be disassembled by removing Stop ring E-4 (Fig. 9).

Fig. 9

1.Remove Stop ring E-4 from the stem of Lever 19.

2.Pull off the Lever 19 while paying attention not to lose Steel ball 4 and Compression spring 14.

DC motor	Reciprocating
	mechanism
Stop ring E-4
	Compression	Housing L
	Spring 4
	Steel ball 4	Lever 19
Stem of	Housing L
Lever 19

ASSEMBLING

Take the reverse step of Disassembling (Fig. 9).