5228 Double Insulated Variable Speed, Dual Action Reciprocating Saw
Tool Safety
•Do not alter or misuse tool. Other uses may in- crease the risk of injury.
•Position electric cord clear of saw blade. Damaged cord can cause electrical shock.
•Do not reach across the saw or wear loose cloth gloves. May become entangled in the tool causing serious injury.
•Do not use dull or damaged saw blades. Less likely to bind and lose control.
•Keep fingers and hands away from the saw blade. Reduces the risk of being cut.
•Keep hands and feet clear of work pieces that may fall after being cut. Reduces the risk of injury.
•Always use the blade recommended for the mate- rial being cut. Less likely to bind and lose control.
•Always hold saw as shown in Figure 4. Have the rubber front housing cover properly installed and not damaged. Prevents electrical shock resulting from cutting a live wire when sawing into a wall or other blind area.
•Do not operate with guide shoe removed. Can result in blade breakage or losing control of the tool.
•Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.
SAVE THESE INSTRUCTIONS!
Specifications
Maximum Material Thickness
Metal Cutting | 3/4″ |
Wood Cutting | 12″ |
Blade Stroke | 11/8″ |
Motor |
|
Type | Universal |
Rating | 115V, |
| 9.6A, |
Switch |
|
OFF/ON | |
High Speed/ |
|
Low Speed | Manual position |
Length | 17″ |
Weight | 9.0 Lbs. |
Accessories
Carbon Steel |
|
Saw Blade | (1) |
Blade Wrench | 3/16″ |
(Hex Key Type) |
|
Operating Instructions
WARNING
Before attempting to use this tool, read complete operating instructions to become familiar with all functions. As this tool was designed for specific ap- plications, we strongly recommend that it NOT be modified and/or used for any application other than for which it was designed.
Description, Specifications and Accessories
Description
The RIDGID No. 5228 Double Insulated Variable Speed, Dual Action Reciprocating Saw is a professional quality, extra heavy duty tool. This saw operates at variable speeds and features a dual blade motion for efficient cut- ting of wood or metal. It is designed for cutting wood up to 12 inches thick, metal up to 3/4 inches thick and various other materials including hard rubber, laminates, fiber- glass and plastics. The motor will operate on
Blade Selection
A wide assortment of RIDGID blades is listed in the RIDGID catalog. For maximum efficiency, long blade life and smooth cutting, select the proper blade for work being done. When cutting metal, always select blade which will allow at least three teeth to be in contact with the thickness of the material.
Blade Installation
No. 5228 Type II
The reciprocating shaft must be fully extended to permit access to the blade release collar. If necessary, gently squeeze the trigger switch to move the reciprocating shaft to its outermost position. Pivot the guide shoe FORWARD to improve access to the blade clamp.
4 | Ridge Tool Company |