Bosch Power Tools 52314, 52324 Circle Cutting, Circle and Parallel Cutting Guide, Attaching Guide

Page 10

BM 2610925943 6-05 6/10/05 10:25 AM Page 10

the saw foot rests on the work, but with the blade well clear of the work. Start the motor, and then very gradually lower the blade. When it touches, continue pressing down on the toe of the saw foot slowly pivoting the saw like a hinge until the blade cuts through and the foot rests flat on the work. Then saw ahead on the line of cut line. We do not recommend plunge cutting with a scroll blade (Fig. 5).

FIG. 5

2.Hook lock knob clamp onto edge of footplate, adjust fence to desired width, and securely tighten lock knob clamp.

CIRCLE CUTTING

1.Before attaching the guide, draw a circle and predrill a 13/64” center hole in workpiece.

2.Drill or plunge cut near the circles edge, turn saw off and move the switch lock to the lock position.

3.Attach guide to saw with edge guide facing UP as shown (Fig. 7).

4.Remove guide pin from end of guide, push pin through hole provided in guide, then into center hole of workpiece.

To make sharp corners, cut up to the corner, then back up slightly before rounding the corner. After the opening is complete, go back to each corner and cut it from the opposite direction to square it off. Do not try to plunge cut into hard materials such as steel.

CIRCLE AND PARALLEL CUTTING GUIDE

This accessory is available at an extra cost. It is used for fast and accurate straight and circle cutting (Fig. 6).

ATTACHING GUIDE

1.Insert bar of guide through lock knob clamp, then through the slots provided in foot, from either side of foot with the edge guide facing down (Fig. 6).

FIG. 7

GUIDE

 

PIN

2

GUIDE

 

PIN

1

HOLE WEDGE

EDGE GUIDE UP

BAR

FIG. 6

LOCK

KNOB

CLAMP

GUIDE

PIN

EDGE GUIDE DOWN

5.Measure the distance from the selected hole to the blade to be equal to the circle radius.

6.Move switch lock to the unlock position, hold the saw firmly, squeeze trigger and slowly push the saw forward. To make a hole, cut from inside the circle; To make wheels or discs, cut from the outside.

Cutting Tip: Cut slowly so the blade will stay straight in the cut. Place small wedges in the cut as shown in Fig. 7, to keep the inner circle from spreading when near the end of the cut.

-10-

Image 10
Contents For English Service LocationsCall Toll Free SeeElectrical safety General Safety RulesWork area safety Personal safetyBattery tool use and care Power tool use and careService Safety Rules for Cordless Jigsaws Battery/ChargerNICKEL-CADMIUM Batteries Battery CareBattery Disposal NICKEL-METAL Hydride BatteriesSymbols Functional Description and Specifications Cordless JigsawsAssembly Operating InstructionsFootplate Angle Adjustment Blower Switched onBlower Switched OFF Blade Orbit Selector LeverCircle and Parallel Cutting Guide Circle CuttingAttaching Guide Releasing and Inserting Battery Pack Important Charging NotesCharging Battery Pack 30 Minute Single BAY-BC130 Charging Battery Pack 30 Minute Dual BAY-BC230 Charging Battery Pack 1 Hour Charger Accessories MaintenanceCleaning Sécurité électrique Consignes générales de sécuritéSécurité du lieu de travail Sécurité personnelleUtilisation et entretien des outils à piles Utilisation et entretien des outils ÉlectroportatifsEntretien Règles de sécurité concernant les scies sauteuses Chargeur de pilePiles NICKEL-CADMIUM Ne tentez pas dePiles NICKEL-HYDRURE DE Métal Symboles Chargeur Description fonctionnelle et spécificationsScies sauteuses sans fil Bloc pilesAssemblage Consignes de fonctionnementSOUFFLE-COPEAUX EN Marche Levier Sélecteur Dorbite DE LameSOUFFLE-COPEAUX SOUFFLE-COPEAUX À LarrêtMontage DU Guide COUPE-CERCLES ET Guide ParallèleDécoupage DE Cercles Dépose ET Repose DU BLOC-PILES Remarques Importantes Concernant LA ChargeChargé et ne reçoit qu’une charge de maintien BLOC-PILES Capuchon DE Protection Chargeur Voyant Rouge Charge DU BLOC-PILE Chargeur DE 1 Heure Entretien AccessoiresNettoyage Seguridad eléctrica Normas generales de seguridadSeguridad del área de trabajo Seguridad personalUso y cuidado de las herramientas Alimentadas por baterías MecánicasServicio de ajustes y reparaciones Normas de seguridad para sierras caladoras sin cordón Batería/cargadorBaterías DE NIQUEL-CADMIO Cuidado de las bateríasEliminación de las baterías Baterías DE NIQUEL-HIDRURO MetalicoSímbolos De Ni-CdSierras caladoras sin cordón Descripción funcional y especificacionesCargador Ensamblaje Instrucciones de funcionamientoSoplador Apagado Soplador DE VirutasSoplador Encendido Ajuste DEL Angulo DE LA PLACA-BASEGuía DE Corte Circular Y Paralelo Cortes EN CírculoColocación DE LA Guía Liberacion E Insercion DEL Paquete DE Baterías Notas Importantes Para CargarSi la luz indicadora verde Parpadea Encendida Carga DEL Paquete DE Baterías Cargador DE 1 Hora Servicio MantenimientoAccesorios LimpiezaLimited Warranty of Bosch Portable and Benchtop Power Tools

52314B, 52324, 52318, 52318B, 52314 specifications

Bosch Power Tools has established itself as a leading name in the industry, renowned for its quality, reliability, and innovation. Among its diverse array of products, models such as the 52314, 52318B, 52318, 52324, and 52314B stand out for their exceptional performance and advanced features, catering to both professionals and DIY enthusiasts.

The Bosch Power Tool 52314 is designed for heavy-duty applications, equipped with a robust motor that delivers consistent performance. One of its key features is the precision-engineered gearbox, which ensures smooth operation and durability in demanding tasks. The ergonomic design allows for comfortable handling, reducing fatigue during extended use.

The 52318B model takes versatility to the next level, featuring a dual-speed setting that accommodates various materials and applications. The integrated Electronic Motor Protection technology safeguards the tool against overloads, extending its lifespan. Additionally, the 52318B boasts an enhanced dust extraction system, ensuring a cleaner work environment and improved visibility during use.

Similar to the 52318B, the Bosch 52318 also prioritizes usability and safety, with user-friendly controls and an anti-vibration handle that minimizes hand fatigue. This model excels in precision tasks, supported by its built-in laser guide that facilitates accurate cutting and alignment.

The Bosch 52324 model further enhances the lineup with its lithium-ion battery technology, which delivers longer runtime and shorter charging times. This feature is ideal for professionals who need reliable tools that won’t let them down in the middle of an important job. The 52324 model is also equipped with a quick-change chuck system, allowing for fast bit changes, thereby improving overall productivity.

Lastly, the Bosch 52314B model combines the best features of its predecessors, offering excellent torque and speed control. It also includes innovative smart technology that adjusts power based on the material being worked on, ensuring optimal performance every time. The compact design of the 52314B makes it suitable for tight spaces while maintaining a powerful output.

In summary, Bosch Power Tools' models 52314, 52318B, 52318, 52324, and 52314B represent the pinnacle of power tool engineering. With their various features, technologies, and characteristics, these tools are designed to tackle any task, ensuring that users achieve professional-grade results with confidence and ease. Whether for construction, crafting, or home improvement projects, Bosch continues to deliver tools that meet the highest standards of quality and reliability.