Black & Decker Official Manual for the LPS7000 Cordless Saw - Instructions and Safety Guidelines
Page 7

90547733 LPS7000 Saw 6/11/09 7:21 AM Page 7

temperature of approximately 75°F (24°C). NOTE: The tool will not charge if the tool temperature is below approximately 32°F (0°C) or above 113°F (45°C).

3.While charging, the charger may hum and become warm to touch. This is a normal condition and does not indicate a problem.

4.If the batteries do not charge properly—(1) Check current at receptacle by plugging in a lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. (3) Move charger and tool to a surrounding air temperature of 40°F (4.5°C) to 105°F (+40.5°C). (4) If the receptacle and temperature are OK, and you do not get proper charging, take or send the tool and charger to your local Black & Decker service center. See Tools Electric in yellow pages.

5.The tool should be recharged when it fails to produce sufficient power on jobs which were easily done previously. Battery life may be greatly diminished if batteries are discharged deeply. DO NOT CONTINUE using product with its batteries in a depleted condition. Recharge discharged batteries promptly.

6.To maximize battery life:

a.Do not fully discharge batteries.

b.Fully recharge batteries after each use.

c.Store tool in a location where the surrounding air temperature is approximately 40°F - 75°F (4.5°C - 24°C).

d.Disconnect charger from tool after charge is complete. WARNING: Fire Hazard. When disconnecting the charger from the tool, be sure to unplug the charger from the outlet first, then disconnect the charger cord from the tool.

OPERATING INSTRUCTIONS

WARNING: Always wear proper eye and respiratory protection while operating this tool.

• Use clamps or another practical way to C

2

secure and support the workpiece to a

 

stable platform. Holding the work by hand

 

or against your body leaves it unstable and

 

may lead to loss of control.

 

• Place blade and shoe lightly against work to

 

be cut.

 

• Switch on saw motor and allow it to obtain

1

maximum speed before applying pressure.

 

TRIGGER SWITCH (FIGURE C)

The tool is equipped with a switch lock-off feature to prevent unintentional operation.

• To switch the tool on, press the lock off button (2) from either side, then squeeze D the on/off switch (1).

•After the tool is running, release the switch lock-off button. The tool will continue to run as long as the trigger is depressed.

•To switch the tool off, release the on/off

switch. There is no provision for locking the tool on.

• This tool is designed with two gripping

 

surfaces for optimal control. Hold saw

 

firmly with one hand (figure C) or both

 

hands (figure D) while cutting.

E

The saw can be used in either of the modes

shown in figure E. Whenever possible, the

 

saw shoe (4) must be held firmly against

 

the material being cut. This will prevent the

 

saw from jumping or vibrating and minimize

 

blade breakage.

 

• A light (6) is built-in to the saw above the

 

blade holder (5). The light will automatically

 

come on each time the on/off switch is

 

depressed.

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VEA EL Español EN LA Contraportada Cordless LITHIUM-ION Compact SAWWork area safety General Power Tool Safety WarningsPower tool use and care Specific Safety RulesIt is important for you to read and understand this manual Safety Guidelines DefinitionsSafety Warnings and Instructions Charging Safety Warnings and Instructions BatteriesFunctional Important Charging Notes Charging Procedure Figure B & B1Nameplate Rating Amps 0 Operating Instructions Trigger Switch Figure CMetal Cutting Figure H JIG SAW / Reciprocating SAW Modes Figures F, F1Wood Cutting Tree TrimmingAccessories MaintenanceBattery Disposal TroubleshootingRbrc Seal BatteryService Information Full TWO-YEAR Home USE Warranty See ‘Tools-Electric’ Yellow Pages For Service & SalesMode D’EMPLOI 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM Toujours Porter UN Équipement DE Protection Homologué Règles DE Sécurité SpécifiquesDescription Fonctionnelle Figure a Avertissements de sécurité et directives bloc-pilesAvertissements de sécurité et directives chargement Lignes Directrices EN Matière DE Sécurité DéfinitionsPour au moins 10 heures. Après la première charge Procédure DE Charge Figures B ET B1Directives D’UTILISATION Remarques importantes sur le chargementLa figure F1 Mode DE Scie Sauteuse les dents de laPlus est recommandée Détente Figure CConseils Pour LES Projets Coupe DU BoisÉlagage D’ARBRE Coupe DU Métal Figure HCause possible Solution possible AccessoiresProblème Information sur les réparations Manual DE Instrucciones 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM Normas DE Seguridad Específicas Pautas DE SEGURIDAD/DEFINICIONES Instrucciones y advertencias de seguridad BateríasAmperios Según Placa 0 a Instrucciones y advertencias de seguridad cargaProcedimiento DE Carga Figuras B Y B1 Notas importantes sobre la cargaDescarga completa. Después del uso, recargue Figura C o con ambas figura D Interruptor Disparador Figura CCortes EN Madera Modos DE Sierra CALADOR/SIERRA Alternativa Figuras F, F1Palanca DE Liberación DE LA Abrazadera DE LA Hoja Figura G Precaución Riesgo de quemaduraSugerencias Para EL Proyecto Problema Causa posibleMantenimiento Accesorios Eliminación DE LA BateríaMONTERREY, N.L CULIACAN, SINMEXICO, D.F MERIDA, YUC90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM

90547733, LPS7000 specifications

The Black & Decker LPS7000,90547733 is a versatile lithium-ion powered lawn mower designed to meet the needs of homeowners looking for a reliable and efficient way to maintain their lawns. This model stands out for its combination of performance, ease of use, and advanced technology, making it an excellent choice for both seasoned gardeners and casual lawn keepers.

One of the main features of the LPS7000 is its powerful 40V lithium-ion battery, which provides ample runtime to take care of medium-sized yards on a single charge. This battery technology not only ensures fade-free power but also enables quick charging, allowing users to get back to mowing with minimal downtime. The mower's exceptional cutting capability is complemented by a durable 20-inch cutting deck, which provides a wide mowing path, resulting in fewer passes needed to achieve that pristine lawn finish.

The LPS7000 also incorporates an innovative IntelliCut technology, which adjusts power automatically based on the thickness of the grass. This ensures that the mower delivers optimal performance in various conditions without wasting battery life or compromising cutting quality. Users can seamlessly transition from mulching to bagging grass clippings. Its efficient grass collection system helps keep the cutting area clear and messy clippings to a minimum.

The ergonomic design of the mower includes a comfortable handle that can be adjusted to multiple heights, ensuring ease of use for a variety of operators. Additionally, the lightweight construction of the mower makes it easy to maneuver around obstacles in the yard, ensuring a precise cut without straining the user.

Another notable characteristic of the Black & Decker LPS7000 is its eco-friendly approach. Being battery-operated means no emissions or noise pollution associated with traditional gas-powered mowers. This feature makes lawn mowing a more enjoyable experience while being kinder to the environment.

In summary, the Black & Decker LPS7000,90547733 is a robust lawn mower that combines advanced technology, user-friendly features, and eco-conscious operation. With its powerful battery, versatile cutting systems, and ergonomic design, it represents an excellent solution for homeowners seeking an efficient way to maintain their lawns while enjoying the benefits of modern technology.
Top Page Image Contents