Black & Decker LPS7000, 90547733 JIG SAW / Reciprocating SAW Modes Figures F, F1, Wood Cutting

Page 8

90547733 LPS7000 Saw 6/11/09 7:21 AM Page 8

JIG SAW / RECIPROCATING SAW MODES (FIGURES F, F1)

 

The LPS7000 can be used in two different ways:

F

F1

JIG SAW MODE - Blade teeth face forward as

shown in figure F.

 

 

RECIPROCATING MODE - Blade teeth face

 

 

downward as shown in figure F1.

 

 

The LPS7000 accepts T-shank blades only.

 

 

Thin kerf 10tpi or higher blade recommended.

 

 

BLADE CLAMP RELEASE LEVER (FIGURE G)

 

 

CAUTION: Burn hazard. Recently used

G

 

blades may be hot.

 

To install blade into saw:

•Push down on the blade clamp release lever (5) to its full open position as shown.

•Insert blade shank (9) from the front.

•Release the blade clamp release lever (5).

To remove blade from saw:

•Push down on the blade clamp release lever (5) to its full open position.

• Remove blade.

• Release the blade clamp release lever (5).

WOOD CUTTING

NOTE: Use “T” shank 10tpi or higher, thin kerf blades.

•Before cutting any type of wood, use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

•Place shoe firmly against work to be cut.

•Switch on saw motor before applying pressure.

•Whenever possible, the shoe must be held firmly against the material being cut. This will prevent the saw from jumping or vibrating and minimize blade breakage.

TREE TRIMMING

•Hold shoe firmly against tree branch. If possible, cut close to the trunk to minimize movement of the branch.

METAL CUTTING (FIGURE H)

NOTE: Use “T” shank 18-24 tpi metal cutting blade.

•In thin gauge sheet metals it is best to clamp thin plywood to underside of sheet. This will ensure a clean cut without excess vibration or tearing of metal.

•Avoid forcing cutting blade as this reduces blade life and causes costly blade breakage.

•When cutting metal piping, do not cut directly through the pipe as you would saw a wooden dowel. Instead, cut around the circumference of the pipe to avoid pinching the blade. Only one section of the blade should be in contact with the pipe.

H

NOTE: You should spread a thin film of oil or other coolant along the line ahead of the saw cut for easier operation and longer blade life. For cutting aluminum, kerosene is preferred.

PROJECT TIPS

•Cut only with sharp blades; they cut cleaner, faster and put less strain on the motor while cutting.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Cordless LITHIUM-ION Compact SAW VEA EL Español EN LA ContraportadaGeneral Power Tool Safety Warnings Work area safetySpecific Safety Rules Power tool use and careSafety Guidelines Definitions It is important for you to read and understand this manualFunctional Safety Warnings and Instructions BatteriesSafety Warnings and Instructions Charging Nameplate Rating Amps 0 Charging Procedure Figure B & B1Important Charging Notes Trigger Switch Figure C Operating InstructionsJIG SAW / Reciprocating SAW Modes Figures F, F1 Wood CuttingTree Trimming Metal Cutting Figure HMaintenance Battery DisposalTroubleshooting AccessoriesBattery Service Information Full TWO-YEAR Home USE WarrantySee ‘Tools-Electric’ Yellow Pages For Service & Sales Rbrc SealMode D’EMPLOI 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM Règles DE Sécurité Spécifiques Toujours Porter UN Équipement DE Protection HomologuéAvertissements de sécurité et directives bloc-piles Avertissements de sécurité et directives chargementLignes Directrices EN Matière DE Sécurité Définitions Description Fonctionnelle Figure aProcédure DE Charge Figures B ET B1 Pour au moins 10 heures. Après la première chargeRemarques importantes sur le chargement Directives D’UTILISATIONMode DE Scie Sauteuse les dents de la Plus est recommandéeDétente Figure C La figure F1Coupe DU Bois Élagage D’ARBRECoupe DU Métal Figure H Conseils Pour LES ProjetsProblème AccessoiresCause possible Solution possible Information sur les réparations Manual DE Instrucciones 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM Normas DE Seguridad Específicas Instrucciones y advertencias de seguridad Baterías Pautas DE SEGURIDAD/DEFINICIONESInstrucciones y advertencias de seguridad carga Amperios Según Placa 0 aDescarga completa. Después del uso, recargue Notas importantes sobre la cargaProcedimiento DE Carga Figuras B Y B1 Interruptor Disparador Figura C Figura C o con ambas figura DModos DE Sierra CALADOR/SIERRA Alternativa Figuras F, F1 Palanca DE Liberación DE LA Abrazadera DE LA Hoja Figura GPrecaución Riesgo de quemadura Cortes EN MaderaMantenimiento Problema Causa posibleSugerencias Para EL Proyecto Eliminación DE LA Batería AccesoriosCULIACAN, SIN MEXICO, D.FMERIDA, YUC MONTERREY, N.L90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM 90547733 LPS7000 Saw 6/11/09 721 AM

90547733, LPS7000 specifications

The Black & Decker LPS7000,90547733 is a versatile lithium-ion powered lawn mower designed to meet the needs of homeowners looking for a reliable and efficient way to maintain their lawns. This model stands out for its combination of performance, ease of use, and advanced technology, making it an excellent choice for both seasoned gardeners and casual lawn keepers.

One of the main features of the LPS7000 is its powerful 40V lithium-ion battery, which provides ample runtime to take care of medium-sized yards on a single charge. This battery technology not only ensures fade-free power but also enables quick charging, allowing users to get back to mowing with minimal downtime. The mower's exceptional cutting capability is complemented by a durable 20-inch cutting deck, which provides a wide mowing path, resulting in fewer passes needed to achieve that pristine lawn finish.

The LPS7000 also incorporates an innovative IntelliCut technology, which adjusts power automatically based on the thickness of the grass. This ensures that the mower delivers optimal performance in various conditions without wasting battery life or compromising cutting quality. Users can seamlessly transition from mulching to bagging grass clippings. Its efficient grass collection system helps keep the cutting area clear and messy clippings to a minimum.

The ergonomic design of the mower includes a comfortable handle that can be adjusted to multiple heights, ensuring ease of use for a variety of operators. Additionally, the lightweight construction of the mower makes it easy to maneuver around obstacles in the yard, ensuring a precise cut without straining the user.

Another notable characteristic of the Black & Decker LPS7000 is its eco-friendly approach. Being battery-operated means no emissions or noise pollution associated with traditional gas-powered mowers. This feature makes lawn mowing a more enjoyable experience while being kinder to the environment.

In summary, the Black & Decker LPS7000,90547733 is a robust lawn mower that combines advanced technology, user-friendly features, and eco-conscious operation. With its powerful battery, versatile cutting systems, and ergonomic design, it represents an excellent solution for homeowners seeking an efficient way to maintain their lawns while enjoying the benefits of modern technology.
Top Page Image Contents