Typicaltypical Instinstallaallationtion

TYPICALTYPICAL INSTINSTALLAALLATIONTION


								Figure 1

Key	Description	Key	Description	Key	Description	Key	Description
A	Air hose	D	In-line Oiler	G	Quick Coupler	J	Female Connector
B	In-line Filter	E	Air Hose	H	Male Connector	K	Spray Gun
C	Tee Fitting	F	Whip Hose	I	Air Tool

OPERAOPERATINGTING INSTRUCTIONSINSTRUCTIONS

To begin using the tool:

1.As a standard practice, drain water from the air compressor tank and air lines prior to use each day (reference your compressor operators manual for detailed instructions).

2.Install a 1/4” NPT male connector (not included) into the air inlet port on the tool (see Figure 2). Note: Use Teflon® Tape on all threaded connections.

3.Turn on the air compressor and allow it to build up pressure.

4.Adjust the air compressor’s regulator or the supply line regulator to 90 PSI.

5.Locate the point on the work object to be drilled. Mark that point with a center punch or an awl to provide a seat for the drill bit.

Figure 2

6.Secure the object in a vise or clamp. Holding an item in the hand may cause injury if it is seized by the drill bit.

7.Select the proper size drill bit.

Always disconnect the drill from the air supply before installing or removing a drill bit. Failure to do so, may result in personal injury.

8.Insert the chuck key into one of the three chuck key holes. Turn the chuck key counter-clockwise to open the jaws of the drill. Insert the drill bit into the jaws, making sure to keep it in the center. Turn the chuck key clockwise to tighten the jaws around the drill bit.

Always remove the chuck key from the chuck before attaching the air supply.

9.Connect the tool to the air hose quick coupler. NOTE: It is recommended that a whip hose with a swivel (P012-0079SP - not included) be used to prevent twisting, kinking and excessive wear to the air hose (ref. item “F” in figure 1 for recommended connections).

10.Place the drill bit tip on the exact point marked and start the drill. Never apply a spinning drill bit to a work object.

11.Hold the drill firmly, gently squeeze the trigger, and apply steady even pressure. When drilling deep holes, withdraw the drill bit several times to clear cuttings. A lubricant can be used when drilling metal to avoid friction. Before drilling completely through an object, reduce the pressure applied to the drill to prevent the drills chuck from causing damage.

Forcing the drill or applying excessive force can cause the drill bit to break, which may result in personal injury.

12.Keep the drill running while pulling it out of the hole, this will prevent jamming. Release the trigger to stop the tool.

4 - ENG

024-0076CT specifications

The Coleman 024-0076CT is a versatile and feature-rich camping lantern designed to meet the needs of outdoor enthusiasts. This innovative product combines functionality, durability, and user-friendly design, making it ideal for camping trips, emergency preparedness, and outdoor events.

One of the standout features of the Coleman 024-0076CT is its impressive illumination capability. With a maximum brightness of 1,000 lumens, this lantern ensures you have ample light for various activities, whether you're setting up camp, cooking, or simply enjoying a nighttime gathering. It offers multiple brightness settings, allowing users to customize the light intensity based on their needs, which helps to extend battery life while also providing the right amount of illumination.

Another key characteristic of the Coleman 024-0076CT is its power source. The lantern is designed to run on both rechargeable batteries and standard D-cell batteries, offering flexibility in how you power it. When using rechargeable batteries, you can easily keep the lantern charged for extended periods, making it a perfect companion for longer trips. The convenient USB port allows for easy charging, ensuring you never run out of power when you need it most.

Durability is another highlight of this Coleman lantern. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. The rugged design includes water resistance, providing peace of mind during unexpected weather changes. This feature ensures that the lantern remains operational even in wet conditions, making it a reliable option for various environments.

In addition to its lighting capabilities, the Coleman 024-0076CT also features a built-in handle for easy carrying and hanging. This thoughtful design element enhances portability, allowing users to conveniently transport the lantern to different locations or hang it in a tent or tree for ambient lighting.

Safety is also a priority. The lantern includes a cool-touch exterior, which prevents overheating and allows for safe handling even after extended use. This essential feature is particularly beneficial when children or pets are around, reducing the risk of burns or accidents.

In summary, the Coleman 024-0076CT is a powerful, flexible, and durable camping lantern that stands out in the outdoor lighting market. With its bright illumination, multiple power options, rugged construction, and user-friendly design, it is an excellent choice for campers, hikers, and anyone who values reliability in their outdoor gear. Whether for casual outdoor use or emergency situations, this lantern delivers performance and peace of mind.