Black & Decker BDCDMT1206KITS instruction manual Troubleshooting, Rbrc Seal

Page 12

•DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO

START IT. DAMAGE TO THE DRILL CAN RESULT.

•Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

•Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

•Make sure switch turns drill on and off.

Drilling in Wood

Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These bits should be sharp and should be pulled out frequently when drilling to clear chips from the flutes.

Drilling in Metal

Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. The cutting lubricants that work best are sulfurized cutting oil or lard oil.

Troubleshooting

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Battery pack not installed properly.

• Check battery pack installation.

 

• Battery pack not charged.

• Check battery pack charging

 

• Attachment is not secured.

requirements.

 

• Make certain the attachment is fully

• Battery pack will not charge. • Battery pack not inserted into charger.

pushed into the Power Unit.

• Insert battery pack into charger until

 

• Charger not plugged in.

LED illuminates.

 

• Plug charger into a working outlet.

 

 

Refer to “Important Charging Notes”

 

• Surrounding air temperature

for more details.

 

• Move charger and battery pack to a

 

too hot or too cold.

surrounding air temperature of above

 

 

40 degrees F (4,5°C) or below 105

• Unit shuts off abruptly.

• Battery pack has reached its

degrees F (+40,5°C).

• Allow battery pack to cool down.

 

maximum thermal limit.

• Place on charger and

 

• Out of charge. ( To

 

maximize the life of the

allow to charge.

battery pack it is designed to shutoff abruptly when the charge is depleted.)

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

Accessories

WARNING: The use of any accessory not recommended for use with this tool could be hazardous. Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the lithium-ion battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC in cooperation with Black & Decker and other battery users, has established

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Catalog Number BDCDMT112 12V MAX BDCDMT120 20V MAX Save this manual for Future referenceVEA EL ESPA-OL EN LA Contraportada Safety Guidelines Definitions Work Area SafetySpecific Safety Rules Always Wear Certified Safety EQUIPMENT  SymbolsImportant Safety Instructions for Battery Chargers FUNCTIONAL DESCRIPTIONRead all Instructions Volts12volt max* Charging Procedure Bad batteryHot/Cold pack delay Important charging notes20volt Max** Charging Procedure Leaving the battery in the charger Operating Power Unit Operating Drill/Screwdriver attachmentScrew driving Keyless Chuck figure HTorque Control figure On-board bit storageTroubleshooting Rbrc SealBattery Service Information Full Two-Year Home Use WarrantyMode D’EMPLOI De catalogue BDCDMT112 12V MAX BDCDMT120 20V MAXLignes directrices en matière de sécurité définitions Page Règles de sécurité spécifiques Symboles Description FonctionnelleAvertissement Lire toutes les directives Tension Longueur totale du cordon en pieds12volt max* Procédure de charge Pile en mauvais état Fonction de suspension du bloc-piles chaud/froidRemarques importantes pour le chargement 20volt Max** Procédure de charge Bloc-piles laissé dans le chargeur20volt Max** Insertion et retrait du bloc-piles de l’outil Détente ET Commutateur Coulissant AVANT/ARRIÈREInstallation ET Retrait DES Modules Figure G Avertissement de sécurité et directives perceusesVissage Réglage du couple figureRangement intégré des mèches PerçageDépannage Perçage DU BoisPerçage DU Métal EntretienAccessoires Page Manual DE Instrucciones Catálogo N BDCDMT112 12V MAX BDCDMT120 20V MAXPautas DE SEGURIDAD/DEFINICIONES Page Normas de seguridad específicas Descripción de las funciones SímbolosAdvertencia Lea todas las instrucciones AmperajeRecomendaciones con respecto al almacenamiento MÁX* BDCDMT11212volt max* Procedimiento de carga Diagnóstico del cargador Batería en mal estadoRetraso por paquete caliente/frío Notas importantes sobre la cargaPara extraer el paquete de baterías Presione el botón MÁX** BDCDMT12020volt Max** Procedimiento de carga Dejar la batería en el cargadorPara instalar el paquete de baterías Inserte el Instalación Y Extracción DE Aditamentos Figura G Precaución Riesgo de descarga eléctrica. BajoAdvertencia Peligro de quemaduras. Las piezas Colocación Y Extracción DE UNA Broca O UNA Punta DestornilladoPortabrocas sin llave figura H Ajuste del control de torsión figuraDetección de problemas Problema Causa posible Solución posibleEspacio en la herramienta para guardar brocas TaladradoMantenimiento AccesoriosReemplazo DE LAS Etiquetas DE Advertencia OS DE Garantia Esta Garantia no Aplica CuandoSolamente Para Propositos DE Mexico Eléctricas Tools-Electric Páginas amarillas Para Servicio y ventas

BDCDMT1206KITS specifications

The Black & Decker BDCDMT1206KITS is a versatile and powerful tool kit that caters to both DIY enthusiasts and professionals alike. Designed for efficiency and ease of use, this kit includes a range of features and technologies that make it a standout choice in the market.

One of the main features of the BDCDMT1206KITS is its innovative Matrix Quick Connect System. This system allows users to easily swap out attachments for various tasks, making the tool incredibly adaptable. The kit comes with multiple attachments, including a drill, sander, and jigsaw, enabling users to tackle a wide range of projects without the need for multiple standalone tools.

The BDCDMT1206KITS is powered by a robust 20V MAX lithium-ion battery, which provides ample power and longevity. This battery technology ensures that you won’t be interrupted mid-project due to power failure. Additionally, the lithium-ion battery has a long shelf life and retains its charge for extended periods, making it convenient for the user. The included charger is designed to quickly recharge the battery, reducing downtime and keeping projects on track.

Comfort and usability are also key characteristics of the Black & Decker BDCDMT1206KITS. The tool features an ergonomic design that minimizes user fatigue during extended use. The lightweight construction makes the tools easy to handle, ensuring precision and control for all types of applications. The easy-to-use controls and intuitive design allow even novice users to quickly get accustomed to the tools.

The kit also includes safety features designed to protect the user during operation. Safety guards and ergonomic grips ensure that users can work confidently while minimizing the risk of accidents.

In addition to its technical specifications, the BDCDMT1206KITS is backed by Black & Decker’s reputation for quality and durability. This tool kit is well-constructed and designed to withstand the rigors of ongoing use.

Overall, the Black & Decker BDCDMT1206KITS is a comprehensive and user-friendly tool kit that combines power, versatility, and safety. It is an excellent investment for anyone looking to expand their toolkit and take on a variety of projects around the home or in a professional setting. With its innovative features and reliable performance, the BDCDMT1206KITS is sure to meet the needs of any user.
Top Page Image Contents