Harbor Freight Tools 96526 To Attach The Charged Battery To The Drill/Driver, Figure a

Page 10

4.Insert the Battery (29) into the Charger Stand (23). (See Figure A.)

5.The Battery (29) will charge in approximately 3 to 5 hours. Do not charge the Battery for longer than 5 hours. Subsequent charges will also take between 3 and 5 hours. Allow the Charger Stand (23) to cool down before charging another Battery.

FIGURE A

BATTERY (29)

CHARGER STAND (23)

AC/DC ADAPTER (24)

To Attach The Charged Battery To The Drill/Driver

1.When the Battery (29) is fully charged, unplug the AC/DC Adapter (24) from its electrical outlet. Then remove the Battery from the Charger Stand (23). (See

Figure A.)

2.Insert the Battery (29) into the Battery Receptacle located at the bottom of the Drill/Driver. Make sure the two Securing Clasps (one on each side of the Battery) engage the Drill/Driver. (See Figure B.)

FIGURE B

BATTERY (29)

SKU 96526

For technical questions, please call 1-800-444-3353.

Page 10

Image 10

Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual For technical questions, please callElectrical safety General Safety RulesWork area safety Personal safetyPower tool use and care Specific Safety Rules ServiceGrounded Tools Tools with Three Prong Plugs Improperly connecting the grounding wire can resultGrounding Electric shockSee 3-Prong Plug and Outlet Outlets for 2-Prong Plug Double Insulated Tools Tools with Two Prong PlugsExtension Cords See Outlets for 2-Prong PlugFeet SymbologySKU For technical questions, please call Unpacking SpecificationsTo Charge The Battery Set-Up InstructionsTo Attach The Charged Battery To The Drill/Driver Figure aTo Insert And Remove Drill And Screw Driver Bits To Operate The Forward/Reverse SwitchOperating Instructions See Figure CTo Operate The Torque Selector See Figure DDrilling An Object Drill Bit SelectionSee Figure E Inspection, maintenance, and cleaning Troubleshooting Problem Possible Causes Possible SolutionsPlease Read the Following Carefully Part DescriptionAssembly Diagram Limited 90 DAY Warranty Record Product’s Serial Number Here